Countdown Timer manual_EN_V1.0

mhpro.net V1.0
1
Interactive Countdown Timer and Chrono
Description
Specially designed to interact with external components. The "countdown" mode allows to
activate external components as siren, beacon light, strobe, solenoid, relay and many others.
Simply connect an internal or external battery from 6 to 16 volts according to the voltage of the
element to be run (5 amperes max). Example: You want to run a 12 volt beacon light, just
connect a 12 volt battery to the external battery connector. This mode also can activates the
accessory for specific programmed duration. Ideal for precise exposure to light or any similar
need.
The module has a programmable cancellation code to stop the countdown. This is perfect if you
want to use it, for example, for a challenge where one has to stop the count before the end.
Developed at the base for Military Tactical Simulation (MilSim) at Paintball. Add challenge to
your scenarios!
The "chronometer" mode allows to calculate the time with an external switch. For example: a
button of any kind or, in a race context, a start/stop door, a carpet with a contact and many
others ...

Summary of content (6 pages)