Automatic Wire Cutter manual v1.0

Automatic Wire Cutter manual v1.0 MHPro.net
Wire size from 1,5 mm to 2,5 mm
Black tip with smaller
bearing (use the lock washer)
NOTE:
Make sure that the tension lever can move freely after changing the bearing.
DO
NOT TIGHTEN TOO MUCH THE TIP to avoid breaking it. Simply tighten it with your fingers
or gently with pliers.
Specifications
Feed speed
Max: Up to 9,2 meter
s
per minute (30 feet per minute)
Min: About 1,5 meter per minute (5 feet per minute)
Wire size capacity
From 1 mm to 2,5 mm
Ø (OD)
(Note that the use of a wire
that approaches the lower and upper limit may cause
some problems depending on the stiffness/flexibility of
the wire.)
Power supply
External 12v 2 amperes DC (positive center)
5,5 mm x 2,1 mm power jack connector
Unit
s
Metric and imperial