- Modern Home Products Corporation Indoor Fireplace User Manual
25
Vermont Castings EWF36A
20005167
The prefabricated chimney used with your replace
should be cleaned from above using an 8” round brush
and the appropriate number of extension rods for com-
plete access.
The chimney cap rst must be removed following the
procedure recommended by the manufacturer. After
thoroughly cleaning the chimney, reinstall the chimney
cap according to the manufacturer’s directions.
• Ash should be removed before the level reaches the
top of the pan. Check each time you re-load, or at
least once a day.
• Keep the area around the replace clear of any com-
bustible material.
• Remove ash from the re box and replace with a
moisture-absorbing material (such as Kitty Litter) to
keep the interior of the replace dry.
• Touch up painted surfaces with black paint.