User Manual

-
37
-
’10 • SC-T-154
Contact the shop where the unit was purchased. (Re-check the communications line connections of the
units.)
Perform operations according to the messages on the screen or turn the power off and then on (power
supply reset).
If the message appears again, contact the shop where the unit was purchased.
When the intake-air temperature is 0°C or less, “--” is displayed.
When it differs from the display of remote controller, contact the shop where the unit was purchased.
This function can be applied to the indoor units, which are the model KXE4 or later, and to the remote
controller, which is the model RC-E1 or later.
Make sure to select “Invalid” for the Individual Lock/Unlock on the Function setting screen.
There may be inadequacy for communication line or the setting of this center console.
Please contact the shop where the unit was purchased.
This may possible that the central control or power system has malfunction.
Please contact the shop where the unit was purchased.