User Manual
-
16
-
’10 • SC-T-154
Caution
Do not connect power supply wire to another terminal
block.When you connect by mistake, damage and damage
by fire of the electric part are caused, and it is very
dangerous.
Please check the wiring thoroughly again before it turns
on power.
Caution
• the meter with pulse transmitter
• the meter with pulse width of 100ms or more
The energy consumption calculated by this central control
does not conform to OIML, and there are no guarantees
concerning the results of the calculations.
Notice
Please choose the new or previous setting of Super Link (SL) in the display of SL3NA-AE (SL3NA-BE). (See user's manual)
It is necessary to change if the connection network is for previous Super Link. Whether the real connection network is new Super
Link or previous Super Link depends on the type of connected indoor unit,outdoor unit,etc. Inquire the agents or dealers for more
information.
When the new Super Link setting, 1 system can connect up to a maximum of 128 units. Be sure to connect wiring to the Super
Link terminal 1 (A1, B1). Be careful not to connect to the Super Link system 2 or 3, as SL3NA-AE (SL3NA-BE) will not be
recognized.
(b) System wiring
1) The upper tier of terminal block (*)
2) The lower tier of terminal block