Instructions / Assembly

to cut aluminum or trimming boards. Make sure you run the saw until maximum speed before you do the
actual cutting to minimize splitting of the bamboo/willow.
To attach the rolled fences to the posts and stringers, secure the fencing to the end post with 10 inch
pieces of galvanized wire, and straighten and align to your satisfaction. Then use the 8 inch lengths to
attach the fencing to the stringers, and the 10 inch lengths to attach the fencing to the posts, a second
person is required as the person on the other side will adjust the fencing, bend the wire, and pass it
through to the other person. That person will use the pliers to pull and twist the ends together. When you
reach the end of one roll, wire another roll to it. When you reach the end post, wrap the rolled fence
around it and secure with wire.