Specifications

Galaxy 5000 technical specifications
MGE UPS SYSTEMS SPTC5 500 UK – 09/2005 page
23
UPS cabinet without battery (in separate cabinet) - width 710 mm
 H x W x D: 1900 x 710 x 850 mm
 Same dimensions for the entire range from 20 to 120 kVA.
Battery cabinets - two widths, 710 and 1000 mm
 For 20 - 30 - 40 - 60 kVA: H x L x P: 1900 x 710 x 850 mm
 For 80 - 100 - 120 kVA: H x L x P: 1900 x 1000 x 850 mm.
Dimensions and weight: See details in table on page 25.
Faster, less expensive installation
 Terminal blocks with pre-mounted screws, simply tighten the lugs.
 Terminal blocks in front at a comfortable height. Large bending radius, no problem in running cables to the
terminal block.
 Doors open 120° for easier and faster movement around the UPS.
 Battery housed in the UPS cabinet up to 80 kVA, one less cabinet to handle and wire.
One standard colour for the entire range
 Colour RAL 9023.
5.2 Cabinet layout
 Installation in a limited-access room (qualified personnel).
 Battery integrated in the UPS cabinet 1 110 mm wide up to 80 kVA (5 minutes backup time) (see fig. 19), for
higher ratings, the UPS is installed in a cabinet 710 mm wide and the battery in cabinet(s) 710 or 1 000 mm
wide (see fig. 20).
 Can be positioned back to the wall, 250 mm minimum overhead clearance.
11
1
0 m
m
7
1 0 m m
7 1 0
m m
1 0
0 0 m m
Fig. 19. UPS cabinet with or without built-in battery.
Fig. 20. Two widths for battery cabinets.