Network Card User Manual
Table Of Contents
- MGE Network Solution
- Installation and Configuration
- Supervision / Administration via a Web browser
- Servers protection
- Set-up of the shutdown parameters
- The different server and UPS shutdown sequences
- Configuring a set of cards with Mupgrade
- Configuration in local mode and via Telnet or SSH
- Maintenance
- Appendices
www.mgeups.com
Network
Management Cards
User Manual
THE UNINTERRUPTIBLE POWER PROVIDER
Network Management Card
– User Manual 34003676EN/GA
Page
54/69
4.2.4 Off/On command
Off/On command is sent from the “UPS control” page
After a power on, controls are disabled during 120 secondes to allow the server to reboot.
4.2.4.1 Main outlet
Utility
Off command with a
shutdown delay = 2
minutes
2
minutes
On command with a
restart delay = 0
minutes
Trap 29 Trap 31
Shutdow
Trap 32
NSM / UMC
Shutdow
Rebo
Main outlet OFF
4.2.4.2 Programmable outlet 1
Trap 29 ShutoffTimer.1
Resta
Trap 31
Shutdow
Tra
p
32
UM-Client
Shutdow
Rebo
Outlet 1 OFF