www.eaton.
Packaging 4 3 1 5 2 Product should put on right direction as show above Ellipse MAX MAX MAX Ellipse MAX MAX Ellipse MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX 2 MAU-00033 AE
Quick start A B A FR / DIN IEC / UNIVERSAL B Ellipse Max 850/1100 / Ellipse Max 600 1500 USBS C C 3 D Ellipse Max 600 USBS 3 D 6 6 MAU-00033 AE 3
Quick start F E Ellipse MAX 600 / 850 / 1100 / 1500 USBS NHF!VQT!TZTUFNT Cffq Tpmvujpo!Qbd 2!t 7 G Product representations not legally binding.
Technical characteristics Ellipse MAX: W UPS power 1100 850 600 600 VA / 360W W Nominal input voltage 1100 VA / 660 W 850VA / 550 W 1500 1500 VA / 900 W 165V - 285V, adjustable to 150V - 285 or 175V - 285V W Input frequency 50/60 Hz (46 - 70 Hz working range) W Voltage/frequency of battery backup 230 V ± 7% (50/60 Hz ± 1 Hz) with pseudosinusoidal wave outlets 9 in battery mode W Total output current for all outlets W Output current of battery backup outlets 9 2.6 A max 3.7 A max 10 A max 4.
ENGLISH Operating conditions Operation W This product is an Uninterruptible 8 : Filtered outlets. 9 : Battery backup outlets. 10 : LED ON indicate that surge protection is active on all outlets. 11 : LED ON indicate a UPS fault. 12 : LED ON indicate an overload on the battery backup outlets. 13 : ON/OFF button for the battery backup outlets. 14 : Protection circuit breaker. Power Supply (UPS) for computers and their peripherals, television sets, stereo systems and video recorders...
1 Problem Diagnostic Solution W The battery backup outlets 9 W Button 13 is not lighted on. W Press button 13 and check that it W The connected devices are not W The devices are not connected to W Connect the devices to the battery supplied when AC power fails. the battery backup outlets 9 . backup outlets 9 . W AC power is available, but the W Circuit breaker 14 , located under W Disconnect excess equipment UPS operates on battery power.
