User manual

THE UNINTERRUPTIBLE POWER PROVIDER
Network Management Card – User Manual 34003991EN/GA - 52 -
6.2.1 Choice 1: Read Network settings
Enables reading of the card's routine settings
6.2.2 Choice 2: Modify Network settings
Enables the modification of network parameters
In DHCP mode, the card can receive the following parameters according to the DHCP server settings
Z IP address
Z Subnet Mask
Z Gateway address
Z Primary DNS server
Z Secondary DNS server
The card must be restarted in order for the new parameters to be taken into account.
6.3 Choice 3: Lost password / Set Login Password to Default
In the even the login or password is lost, choice 3 enables the return to the default password:
-----------------------------------------------------------------------------
MGE UPS SYSTEMS
NETWORK MANAGEMENT CARD
-----------------------------------------------------------------------------
1 : Reset
2 : Network configuration
3 : Set Login Password to Default