User manual

THE UNINTERRUPTIBLE POWER PROVIDER
Network Management Card – User Manual 34003991EN/GA - 24 -
4.2.7 Measurements
Click on "Measurements" in the menu
The following measurements are saved and time-stamped (env. 430):
Z "Input voltage": Value of the utility voltage supplying the UPS
Z "Input frequency": Value of the utility frequency supplying the UPS
Z "Output voltage": Value of the output voltage of your UPS
Z "Output load (%)": Value of the percentage of load at UPS output
Z "Battery capacity (%)": Percentage of charge available in the battery
Z "Remaining time (min.)": Estimation of the remaining backup time
Z The save frequency of these values is defined in the "System" page (60 seconds by default). Approximately 435 time-stamps are stored
permanently on the card. The oldest time-stamps are automatically deleted.
Z "Save Log" enables all saved values to be opened or saved in CSV format. (compatible with Excel type spreadsheets)
Z "Clear Log" enables deletion of all records. Enter the login/password to validate this action.