Installation manual

34003905EN/AA
The Environment sensor is a Network Management Card option. It is
available from MGE UPS SYSTEMS (cat. no 66846).
The sensor remotely monitors the UPS environment by regularly
measuring the temperature and humidity, and checking the states of
two external contacts. It can also send alarms (e-mail, SNMP trap)
tripped by pre-set thresholds.
Connection is made via the Service port (Settings/Sensor) on the
Network Management Card. The sensor is detected automatically.
Configuration and supervision use a menu that may be accessed
directly from the home page. For more information, see the user
manual of the Network Management Card.
When correctly installed and used in accordance with manufacturer
instructions, the card complies with the following standards:
◗ ITE (Information Technology Equipment) safety: IEC/EN 60950-1
2002
◗ EMC: EN 61000-6-2 (2002), EN 61000-6-3 (2002), IEC/EN 62040-2 (2002)
In compliance with European directives:
◗ Low voltage: 73/23/EEC and 93/68/EEC.
◗ EMC: 89/336/EEC and 93/68/EEC.
Federal Communication Commission (FCC) statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment.
The information presented in this manual is also available in other
languages in the download section of the MGE UPS SYSTEMS site
(www.mgeups.com)
.
SENSOR CONNECTION (option)
66102
Settings/Sensor
ETHERNET
1
0
0M
10
M
U
PS
d
ata
R
S
232
O
n
=
L
ink
B
lin
k
= A
c
t
ETHERNET
TECHNICAL CHARACTERISTICS
Physical characteristics
Dimensions (W x D x H) 132 x 66 x 42 mm
Weight 70 g
RoHS 100% compatible
Storage
Storage temperature
range
-10°C to 70°C
Ambient conditions
Operating temperature
range
0°C to 40°C
Relative humidity 90% RH max. without condensation
Card performance
Supply voltage 5V ±5%
Supply current (all LEDs
ON and Environment
Sensor connected)
300 mA max.
Functions
Web supervision 5 browsers max. (http),
3 browsers max. (https)
Languages English, French, German, Italian, Spanish
Alarms E-mail, SNMP TRAP, Web page
Log 400 measurements or events
Server protection Up to 50 servers protected
Network Fast ETHERNET, 10/100 Mbits, auto-negotiation
HTTP 1.1, SNMP V1, NTP, TFTP, SMTP,
BOOTP/DHCP
Identification User name and password
Security SSL 3.0, TLS 1.0
Browsers Microsoft Internet Explorer 6.x or higher
NMS Enterprise Power Manager (EPM)
Management-Pac 2
MIB MIB II standard - MGE V1.7 MIB
Settings (default values)
IP network BOOTP/DHCP enabled
IP address: 172.17.16.16
Subnet mask: 255.255.0.0
Gateway: 0.0.0.0
NTP server: pool.ntp.org
Web-page access control User name: MGEUPS
Password: MGEUPS
Service-port menu access
control
Password: MGEUPS or mgeups
(not modifiable)
Date and time Synchronise with an NTP server (GMT)
Service port 9600 bits/s, 8 bits, 1 bit stop, no parity
ELECTROMAGNETIC COMPATIBILITY
WEB SITE