User manual

86-86000-00 B02 - Page 50
3. Operation
3.3.1 UPS personalization through external software
Insert the Solution-Pac 2 CD ROM in your CD drive.
At the first Navigator Screen, select “Installation” and follow the instructions to install z Solution-Pac 2
for Windows.
If nothing appears, launch startup.exe z
Then go to “ z Advanced settings” and “UPS settings”.
Please note that the Linux/Unix/MacOS versions of Personal Solution-Pac do not include this feature.
3.3.2 Final Startup sequence
Press the <ON> button more than 3 seconds.
After UPS internal test sequence, the green LED z
15
goes on.
CAUTION
During the startup, if the Bypass AC source is out of tolerance, there will be a 10 msec
output interrupt.