Owner Manual

37 | Page Catalyst Owner’s Manual | © MF Fire 2017
Annual Maintenance
Exterior Paint
To fix areas on the exterior of the stove that have been scratched or
dinged, simply use aerosol stove paint. Color match paint can be
ordered directly from MF Fire. Simply email us at [e-mail] and
tell us the color you need, and we will ship it right out to you.
Paint should only ever be applied with the stove is cool. Allow the paint
at least one hour to cool. After applying the paint, the newly painted
area may appear darker than original until it is cured. When using the
stove next, the curing process may give off some fumes. Windows and
other ventilation means should be utilized.
Glass
In the event of broken door glass, a new pane of glass must be installed
before usage may continue. Do not operate with broken glass!
To avoid breaking the glass, avoid striking the glass, slamming the
door shut, or building the fire too close to the glass.
To replace broken glass, carefully open the front door while the stove
is cool. Remove large shards with gloves and dispose of appropriately.
Then carefully unscrew the interior doorframe, taking care to keep all
screws.
Replace the glass with official MF Fire replacement glass. The main
pane is 0.1875” (5 mm) ceramic glass, 13.31” (416 mm) x 13.5” (349
mm). The left pane is 0.1875” (5 mm) ceramic glass, 13.31” (416 mm)
x 4.25” (117 mm). The left pane is 0.1875” (5 mm) ceramic glass, 13.31”
(416 mm) x 3.75” (117 mm). Do not use unauthorized substitute
materials.
When replacing glass, ensure that the glass is properly surrounded by
graphene impregnated wood stove gasket (1” rope gasket on the
exterior, 1”x1/8” flat gasket on the interior), and centered over window
openings.