Owner Manual
Table Of Contents
- Introduction
- Table of Contents
- Safety Precautions
- Features and Specifications
- Stove Installation
- Planning the Installation
- Stove Placement Requirements
- Standard Installation
- Corner Installation
- Chimney Requirements
- Chimney Connector Requirements
- Chimney Termination Requirements
- Special Installation: Exterior Factory-Built Chimney
- Special Installation: Masonry Chimney
- Special Installation: Masonry Fireplace
- Installing the Soapstone
- Connecting the Combustion Fan
- Connecting the Smart Sensors
- Initial Curing
- How Catalyst Works
- Catalyst Smart App
- Regular Maintenance and Troubleshooting
- Monthly Maintenance
- Annual Maintenance
- Catalytic Combustor Replacement
- Lifetime Limited Warranty
Catalyst Owner’s Manual | © MF Fire 2017 Page | 6
low burn rate that must not be
altered. It is against federal
regulations to alter this setting
or otherwise operate this
wood heater in a manner
inconsistent with operating
instructions in this manual.
Hot while in operation. Keep
children, clothing and furniture
away. Contact may cause
skin burns.
Do not burn garbage or
flammable fluids such
as gasoline, naphtha or
engine oil
Never over-fire the
Catalyst, as it could
lead to a house fire. If
the unit or chimney
connector glows, you
have over-fired the unit.
Maintenance
Never attempt to modify or
repair the appliance beyond
instructions given in this
manual.
Empty the ash regularly and
dispose of it in a metal
container with tight lid.
Allow the Catalyst to cool
before conducting any
maintenance.
Inspect the chimney
connector at least twice
monthly.










