Owner Manual
Table Of Contents
- Table of Contents
- Safety Precautions
- Features and Specifications
- Stove Installation
- Planning the Installation
- Stove Placement Requirements
- Standard Installation: Through back wall
- Standard Installation: 90-degree elbow
- Chimney Requirements
- Chimney Connector Requirements
- Chimney Termination Requirements
- Special Installation: Exterior Factory-Built Chimney
- Special Installation: Masonry Chimney
- Special Installation: Masonry Fireplace
- Installing the Brick and Ceramic Fiberboard
- Catalytic Combustor
- Ash Retainer
- Stove Top Thermometer
- Initial Curing
- How Nova Works
- Regular Maintenance and Troubleshooting
- Monthly Maintenance
- Annual Maintenance
- Catalytic Combustor Replacement
- Lifetime Limited Warranty
Nova Owner’s Manual | © MF Fire 2017 Page | 8
Stove Placement Requirements
Nova must be placed in a room with a source of fresh air.
Stove must be placed so that no combustibles are within, or can swing
within 36" (914mm) of the front of the stove (drapes, doors, etc.).
Floor protection must extend around the front, sides, and rear of the
stove, according to listed clearance requirements below. Floor
protection must be made of a non-combustible material and at least
0.018” (0.45 mm) thick with the minimum R-values shown in the
installation specifications below.