Owner Manual
Table Of Contents
- Table of Contents
- Safety Precautions
- Features and Specifications
- Stove Installation
- Planning the Installation
- Stove Placement Requirements
- Standard Installation: Through back wall
- Standard Installation: 90-degree elbow
- Chimney Requirements
- Chimney Connector Requirements
- Chimney Termination Requirements
- Special Installation: Exterior Factory-Built Chimney
- Special Installation: Masonry Chimney
- Special Installation: Masonry Fireplace
- Installing the Brick and Ceramic Fiberboard
- Catalytic Combustor
- Ash Retainer
- Stove Top Thermometer
- Initial Curing
- How Nova Works
- Regular Maintenance and Troubleshooting
- Monthly Maintenance
- Annual Maintenance
- Catalytic Combustor Replacement
- Lifetime Limited Warranty
Nova Owner’s Manual | © MF Fire 2017 Page | 20
Catalytic Combustor
Please refer to the instructions that accompanied your catalytic
combustor for installation instructions. Your stove should not be used
without installing the catalytic combustor properly.
Ash Retainer
Your Nova comes standard with an ash retainer than can be used to
extend the number of burns between emptying the ash, if desired. The
6” leg L-shaped ash retainer is placed directly on the brick on the
firebox floor. This allows for a lip in front of the glass to retain ash. The
ash retainer placement is pictured below.