Drive Alignment Guide 2100 / 9100 / 3100 – 2600 / 9600 Series & Printer Alignment Guide PicoJet – Prism Plus – P-55
Printer and Drive Alignment Guide REV 3 : 12.30.10 Your MF Digital DVD / CD duplicator comes prealigned at the factory. Note : If you’re running the Scribe PC, Director, or SA Series (embedded) application, please terminate them first before double clicking the Loader Diagnostics icon.
Printer and Drive Alignment Guide REV 3 : 12.30.10 Rear of the drive For purpose of orientation, as indicated by the picture to the right, Rear of the drive means towards to back (away from you). Front of the drive, means to the front (closer to you). When aligning the drives, the disc should sit approximately between the 4 rectangular cutouts in the tray. These are indicated by circles. Front of the drive The picture to the right is a sample of what you are trying to accomplish.
Printer and Drive Alignment Guide REV 3 : 12.30.10 Now that you have an idea, let’s try a few commands that will align your drives. Let’s make sure you have a connection, pressing the letter “C”, will calibrate the Loader. When calibration is complete, an “X” appears indicating status is OK. You can also use the “C” command to clear an error if you make a mistake. Put a few discs in the right side hopper. And open the right top drive in your machine.
Printer and Drive Alignment Guide REV 3 : 12.30.10 For every CTRL-S or CTRL-R you will receive a 2 digit code indicating a position. Before going to test the alignment, make sure you press the letter “C” for calibrate. Then use the letter “I” for insert for drives on Right Side. Should you need to further adjust the alignment, you can continue entering the CTRL-S or CTRLR as needed. This process would be repeated for the lower right side drive as well.
Printer and Drive Alignment Guide REV 3 : 12.30.10 Printer Alignment Sometimes if may be necessary to adjust the alignment of your printer. All MF Digital Printers mount to the right side. So using the CTRL-R / CTRL-S will assist you. Please keep in mind, if you adjust this alignment for your printer, you will affect the alignment for the right side drives. So a common placement needs to be assured when adjusting the printer alignment.
Printer and Drive Alignment Guide REV 3 : 12.30.10 The PicoJet 6000 is the easiest of all 3 printers to align. This is due to the design of the tray. You will find that the PicoJet 6000 Printer has a more “forgiving” tray space to align the discs. When aligning the disc on PicoJet, there are 3 points to consider, the clamping bar, and the two white washers at the front of the tray.
