User guide

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 31
Aligning the Printer
Selecting the Printer
• First, the appropriate printer must be selected. To select the appropriate
printer, do the following:
• At the “Select Copy or Compare, press the “2” key
• From the Options Screen, press the “5” to select the
printer
• Select the appropriate printer that you have installed on
the system. Choose the number that corresponds with the
printer that you have installed. After choosing the printer,
the system will reboot.
Aligning the Printer
• After the system reboots, the main operating screen will be depicted
below:
• Press the “4” key. You will be prompted to “Start Loader Test
Mode?”. Press “Stop/No” to bypass “Loader Test Mode”
• You will then be prompted to enter the “Printer Alignment” feature, as
depicted below: