User guide

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 26
• When selected, the Loader Test Mode function allows you to
manually control the robotic functions of the system, for
troubleshooting and testing purposes.
• “C”- calibrates the picking arm
• “I”- loads a disc into the open drive from the input spindle
• “A”- unloads the disc and places it on the accept spindle.
• “R”- key puts the disc in the rejection area in front of the drive
tower.
• Press the “Stop/No” key to exit
• If you pressed the “Stop/No” key for Loader Tester you will be
prompted to align the printer.
• Please see the Aligning the Printer section of this manual (page 30) for
further instructions.
• Press the “5” key on the keypad. The screen will now read:
• By using the Audio Track Import feature, audio compilation discs
can be created one track at a time from one or more masters.
• Manually place an audio master disc into drive number 1.
• Press the “Start/Yes” key
• Press the number of the track you wish to import and press the
“Start/Yes” key. Only one track may be imported at a time. All of the
tracks will create one master image on the hard drive.
• Once you have imported all of the tracks, copy the image you just
created from the hard drive as you normally would.