User manual

Ripstation Pro Main User Guide 100-5-01-000
Ripstation Pro – User Manual Page 29 of 43
• Client Name - Key in the client name (required) and a folder will be created of
the same name inside the default output path folder where all encoded audio
files will be placed.
• Output Formats – Displays the CODECs to be used for ripping. To enable a
CODEC to be used, highlight (by the blue bar) the CODEC in the display and
check the ‘Use’ tick box on the left.
• [ADD] Click Add to add an output codec to the output list.
• [EDIT] Click Edit to edit this Codec's settings. This will open a dialog in order to
configure the codec settings including bit rates and VBR/CBR options (see section
4.5.2).
• [DELETE] Click Delete to remove the codec from the output list. Only codecs
that are checked will be used.
• Force default filenames should only be checked if multiple formats are being
encoded to. This will prefix the codec name above the album name – e.g.
C:\Root\clientname\MP3\
• Use this output path - when checked will force the program to use this path
as the root location for all files and will override the setting within each codec.
• Unicode ID3 tags is defaulted to ‘on’ as standard.
• Copy Data Tracks - Copy data tracks option introduced to copy data CDs as
part of the batch process.
• Audiofiles only - Audio files only option filters out non-audio files by only
copying the following:
*.mp3
*.wav
*.flac
*.aac
*.wma
• Make a duplicate copy of output files here – This will place a copy of the
ripped files to the specified location
• [Start Batch] closes this screen and starts the batch process.
NOTE: Codec and path settings will be stored from session to session, for a quick
batch simply key in number of CDs and check the codec.
4.5.2 Codec Settings
Ripstation Pro ships with a number of standard CODEC options pre-configured.
However CODECs may be added or deleted and the settings for the MP3, WMA, AAC and
OGG CODECs may be modified.
• To add a new codec, click the [Add] button in the Batch Properties dialog box.
The New Output dialog will appear as in figure 4.16