Installation guide

Page 3

Director EC Office Publisher

with OptiEC PRO Printer

Installation Guide

Document Revision: 2005/05/20

DIRECTOR EC OFFICE PUBLISHER WITH OptiEC PRO PRINTER

INSTALLATION GUIDE

DIRECTOR EC OFFICE PUBLISHER -- PC MINIMUM REQUIREMENTS

• A Pentium® 4 or compatible personal computer @ 2 GHz or faster.

• Windows 2000 Professional (service pack 4.0 or higher) or Windows XP (service pack 1.0a or higher)

• 1GB RAM

• One (1) Hard Disk Controller Adaptec BRAND Ultra 29160

• One (1) 18 GB SCSI 15,000rpm Ultra 160 SCSI Hard Drive (formatted NTSF) as follows:

• One (1) Basic Partition for System (C:)

• Two (2) 9GB NTFS Partitions (D:)(E:) – Temp folder in root on each partition

• One (1) Free PCI slot

• One (1) internal USB port for the Software Identifier Card (DKI-011-0107)

• One (1) external USB port for OptiEC PRO printer

• One (1) PCI Firewire B Card, IEEE-1394B, (supplied by MF DIGITAL)

• One (1) DKI011-0107 (supplied by MF DIGITAL) PC needs a free 3.5” floppy drive power cable for DKI card.

• One (1) External COM port (COM1 or COM2)

• Network 10/100Mbs on Board

• Video 1024 x 768

THE DIRECTOR EC SOFTWARE MUST BE INSTALLED in “C:\” DIRECTORY

MF DIGITAL

121 Carolyn Blvd.

Farmingdale, NY 11735

001 631 249 9393