Installation guide

Page 14
Director EC Office Publisher
with OptiEC PRO Printer
Installation Guide
Document Revision: 2005/05/20
Aligning the Drive Tower
(fig. 3)
(fig. 4)
(fig. 5)
1. From your Start Menu Open the SCRIBE EC
Alignment Utility (fig. 1). It will be located in
the folder designated when you installed the
alignment utility. Choose the appropriate COM
Port which the Scribe EC loader is installed
on. Then choose the “All other printer types
or drive’s bay” and click the Start Test button
(fig. 1).
2. Follow the onscreen instructions by opening
the top CD/DVD drive tray, and clicking the
Yes button (fig. 2). The picker arm will hover
the disc over the drive tray, observe the discs
position and make the appropriate adjustments
to the drive tower (fig. 3).
3. Click the Yes button when you are satisfied
with your adjustment (fig. 4).
4. The picker arm will then place the disc onto
the drive tray. Follow the on screen
instructions and click the OK button (fig. 5).
5. Once you are satisfied with the drive tower
alignment, tighten the thumb-screws located
on both sides of the drive tower (fig. 6).
(fig. 1)
(fig. 6)
(fig. 2)