Installation guide

Page 11
Director EC Office Publisher
with OptiEC PRO Printer
Installation Guide
Document Revision: 2005/05/20
Selecting system drives and OptiEC PRO printer for Director EC
1. Execute the Director EC 3.00
program.
2. When the Director EC software
is executed for the first time it
might prompt the “System
Drives Missing” message. Click
OK to proceed.
3. Next, go to “System Setup” tab
and select system drives “D and
E” Depending on systems
configuration system drive
letters might differ. (fig. 1)
4. Select the MF Digital OptiEC
PRO printer.
5. Make sure the Skip Alignment
Spindle option is checked.
6. Finally, click the Apply button
and restart the Director EC
program.
System Setup tab
(fig. 1)
MF Digital OptiEC PRO
Note:
***Do not select drive C: as a system drive ***