PB-TRAILER XT2200 SERIES XT1600 SERIES XT TRAILER Models XT1600 • XT1600L • XT2200 • XT2200L • XTS2200XL Owner / Operator’s Manual & Parts Book 3/2015 6990633 (1-13) Printed in U.S.A.
1.0 IMPORTANT INFORMATION The serial number is stamped on the front left hand frame tube. Please enter the model, serial number and additional information in the space provided for future reference. Model No. Serial No. Date of Purchase Dealership Dealership Phone No. Always use your serial number when requesting information or when ordering parts.
2.0 INTRODUCTION Congratulations on your purchase of a new Meyer farm equipment product. Undoubtedly you have given much consideration to your purchase and we’re proud that you have selected Meyer. Pride in craftsmanship, engineering and customer service have made Meyer products the finest in the farm equipment industry today. There is no substitute for quality. That is why thousands of people like you have purchased Meyer farm equipment.
FARM EQUIPMENT BUYERS TRUST THE NAME MEYER! Meyer Manufacturing Corporation -4- PB-TRAILER
TABLE OF CONTENTS 1.0 IMPORTANT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.0 MANUFACTURER’S WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4.0 SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3.2 Tire Inflation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 7.4 STORING THE TRAILER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 7.5 RETURNING THE TRAILER TO SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 8.0 PARTS REPAIR AND REPLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 8.1 REPLACEMENT PARTS . . . . .
3.0 MANUFACTURER’S WARRANTY 3/2015 MEYER XT TRAILER I. The “Owner's Registration Form” must be completed in full and promptly returned to Meyer Mfg. Corp. for this warranty to become both valid and effective. All warranties on new Meyer XT Trailers shall apply only to the original retail customer from an authorized Meyer Mfg. Corp. dealership. II.
Meyer Manufacturing Corporation -8- PB-TRAILER
4.0 SAFETY The Meyer XT Trailer is manufactured with operator safety in mind. Located on the trailer are various safety signs to aid in operation and warn of hazardous areas. Pay close attention to all safety signs on the trailer. Carefully follow the operating and maintenance instructions in this manual and all applicable safety laws. Failure to follow all safety procedures may result in serious injury or death. Before attempting to operate the trailer, read and study the following safety information.
4.1 SAFETY PRECAUTIONS All individuals who will operate this trailer must read and completely understand this Operator’s And Parts Manual. Operator must have instructions before operating the machine. Untrained operators can cause injury or death. • DO NOT allow anyone to operate, service, inspect or otherwise handle this equipment until all operators have read and understood all of the instructional materials in this Operator’s And Parts Manual and have been properly trained in its intended usage.
4.1.1 Farm Implement Tires Recommended Safety Precations • Always remove the valve core and deflate the tire before any work is performed. • Always use the proper and approved tools to demount and mount the tire. • Always inspect all rim/wheel parts for wear, damage, cracks, rust or mismatched components. • Always destroy damaged or unserviceable parts. • Always inspect the tube and tire for cord or side damage, cuts or wear. Unrepairable damaged items must be discarded.
4.2 SAFETY SIGNS Read all safety signs on the trailer and in this manual. Keep all safety signs clean and replace any damaged or missing safety signs before operating the equipment. Do Not remove any safety signs. Safety signs are for operator protection and information. :$51,1* &586+,1* +$=$5' 7R SUHYHQW VHULRXV LQMXU\ RU GHDWK .HHS KDQGV DQG ERG\ RXW RI KLWFK DUHD ZKHQ DWWDFKLQJ WRZLQJ YHKLFOH .
4.3 SHUTOFF & LOCKOUT POWER Any individual that will be adjusting, servicing, maintaining, or clearing an obstruction from this machine needs to ensure that this machine stays safely “OFF” until the adjustment, service, or maintenance has been completed, or when the obstruction has been cleared, and that all guards, shields, and covers have been restored to their original position. The safety of all individuals working on or around this machine, including family members, are affected.
Meyer Manufacturing Corporation - 14 - PB-TRAILER
5.0 PRE-OPERATION DO NOT allow anyone to operate, service, inspect or otherwise handle this trailer until all operators have read and understand all of the instructional materials in this Operator’s And Parts Manual and have been properly trained in its intended usage. Verify that the trailer is securely fastened to the tractor / truck. Verify that all connections and bolts / hardware are tight and securely fastened before operating the trailer.
5.1.2 General Inspection Inspect the chassis’ axles, o-beams, spindles, tires, hitches, safety shielding, safety signs and safety lighting regularly. These parts if not watched closely, could pose potential injury or death. If any part is found in need of repair, follow the SHUTOFF & LOCKOUT POWER recommendations and have qualified personnel repair immediately. Check to see that no obstructions are present on the trailer prior to use. Be sure that there are not tools laying on the trailer.
5.4 TRANSPORTING AVOID SERIOUS INJURY OR DEATH • • • • • • • • • Read and understand owner’s manual before using. Review safety precautions annually. Before operating the trailer, look in all directions and make sure no bystanders, especially small children are in the work area. No riders allowed when transporting. Do not drink and drive. Before moving, be sure required lights and reflectors are installed and working. Before maintenance or repair, stop vehicle, set parking brake, and remove ignition key.
You must observe all applicable traffic laws when transporting on public roadways. Check local laws for all highway lighting and marking requirements. Failure to heed may result in serious personal injury or death. (Tractor Powered) Do not tow at speeds in excess of 20 mph. Failure to heed may result in serious personal injury or death. Surge brakes are to be used for assisting in stopping ONLY and are not to be relied on as the only means for stopping the towed piece of equipment.
5.4.2 Trailer Brake System (Optional) Surge brakes are to be used for assisting in stopping ONLY and are not to be relied on as the only means for stopping the towed piece of equipment. Before towing, check that the brake fluid reservoir is maintained to at least half full. If not refill with DOT 3 brake fluid. Check complete system for any leaks and repair as needed. The safety break-away chain is not to act as a parking brake.
Gross Weight MODEL X-804 X-1004 X-1206 X-1304 X-1506 X-1604 X-1704 X-1906 X-2206 X-2004 MAXIMUM GROSS WEIGHT (LBS) 16,000 20,000 24,000 26,000 30,000 32,000 34,000 38,000 44,000 40,000 MINIMUM TRACTOR WEIGHT UP TO 20 MPH (LBS) 11,000 13,500 16,500 17,500 20,500 21,500 23,000 25,500 29,500 27,000 MATERIAL ESTIMATED WEIGHT PER CUBIC FOOT MATERIAL LBS / CU. FT. Soybeans 47 lbs. Cotton Seed (Dry) 20 lbs. Corn (Shelled) 45 lbs. Corn Silage 30 lbs. Haylage 20 lbs. Sawdust 17 lbs. Source: SAE D384.
6.0 OPERATION DO NOT allow anyone to operate, service, inspect or otherwise handle this trailer until all operators have read and understand all of the instructional materials in this Operator’s And Parts Manual and have been properly trained in its intended usage. Before operating the trailer, look in all directions and make sure no bystanders, especially small children are in the work area. Do not climb or step on any part of the trailer at any time. Turn on level ground. Slow down when turning.
Meyer Manufacturing Corporation - 22 - PB-TRAILER
7.0 MAINTENANCE Before servicing this equipment, ensure that all personnel, including family members are familiar with the equipment and the safety hazards that are present, along with the safety practices that should be observed while working in this equipment. Before servicing or inspecting this trailer, have it hitched to a tractor with engine off, keys removed and parking brake set or chock all four wheels of trailer. Fluid such as hydraulic fluid, grease, etc.
Inspection Daily or every 8-10 loads: • Check wheel hub lug bolts for proper torque. See page 24. • Check wheel hub bearings for play. Adjust bearing preload if required. (See 7.2.1 Adjust Wheel Bearing Preload on page 24.) • Check tires for proper inflation. See page 27. Monthly or every 100-150 loads: • Check trailer for loose and fatigued fasteners. Check all pivots for play. Tighten or replace as required. Annually: • Check tires for wear and replace when necessary.
7.2.3 Brakes (Optional) Before using any equipment equipped with brakes the operation of the brakes should be checked. Brake linings should be replaced before the rivets or support plates come in contact with the wheel drum. Perform all necessary maintenance before using equipment. Any corrosive materials (saltwater, fertilizers) are destructive to metals. To properly maintain the life of the brake system flushing with a high pressure water hose is recommended.
7.3 FARM IMPLEMENT TIRES 7.3.1 Service And Maintenance Tips Agricultural tires are designed to carry a specified load at a specified inflation pressure when mounted on a specified width rim. When these conditions are met, the deflection of the tire carcass is in the optimum range and maximum tire performance can be expected. If this combination of design factors is altered for any reason, tire performance will be reduced. Inflation pressures should be checked at least every week.
Roading Of Farm Implement Tires • Tractor tires operate most of the time in field conditions where the lugs can penetrate the soil, and where all portions of the tread make contact with the ground. In operating on hard roads with low inflation pressure there is an undesirable distortion of the tire during which the tread bars squirm excessively while going under and coming out from under the load.
7.4 STORING THE TRAILER Sometimes it may be necessary to store your Meyer trailer for an extended period of time. Below is a list of items to perform before storage. • Thoroughly clean the equipment. • Lubricate the equipment. (See 7.1 LUBRICATION on page 23.) • Make appropriate adjustments to equipment. • Inspect the hitch and all welds on the equipment for wear and damage. • Check for loose hardware, missing guards, or damaged parts. • Check for damaged or missing safety signs (decals).
8.0 PARTS REPAIR AND REPLACEMENT 8.1 REPLACEMENT PARTS Before servicing this equipment, ensure that all personnel, including family members are familiar with the equipment and the safety hazards that are present, along with the safety practices that should be observed while working in this equipment. Inspect the chassis’ axles, o-beams, spindles, tires, hitches & all safety shielding, safety signs and safety lighting regularly. These parts if not watched closely, could pose potential injury or death.
It is important that everyone who works on this equipment is properly trained to help ensure that they are familiar with this procedure and that they follow the steps outlined above. This manual will remind you when to Shutoff & Lockout Power. At times parts on this implement will become worn or damaged. Performing repairs on this implement can pose a risk of injury including death.
DESCRIPTION PAGE # XT1600 SERIES FRAME AND O-BEAM 32 XT16-162-WS & XT16-202-WS FRAME AND O-BEAM 34 XT2200 SERIES FRAME 36 XT22-264, XT22-240 & XT22-264 FRAME (WITHOUT 3-POINT SCALE) (SN 0822201 AND LATER) 38 XT22-216-WS, XT22-240-WS & XT22-264-WS FRAME & O-BEAM 40 XT2200 SERIES (PRIOR TO SN 0822201) 42 XT2200 SERIES (SN 0822201 THROUGH 1422XT317) 44 HUB FOR XT1600 SERIES 46 HUB FOR XT2200 SERIES 47 XT2200 SERIES OPTIONAL BRAKE PACKAGE (1 OF 3) 48 XT2200 SERIES OPTIONAL BRAKE PACKAGE (2
XT1600 SERIES FRAME AND O-BEAM PRIOR TO SN 1416XT244 2 15 6 16 2 14 7 3 11 8 1 10 10 11 4 5 8 9 12 13 Meyer Manufacturing Corporation - 32 - PB-TRAILER
KEY PART NUMBER QTY DESCRIPTION 75-1600 1 XT1600 Trailer Frame Assembly 75-1600-L 1 XT1600L Trailer Frame Assembly 75-0074 1 Bolt On Hitch 75-2005 1 Optional Swivel Hitch 3 956-3803 1 Jack 4 75-1601 1 Right O-Beam Assembly Less Hubs 75-1603 1 Right O-Beam Assembly W/Hubs 75-1602 1 Left O-Beam Assembly Less Hubs 75-1604 1 Left O-Beam Assembly W/Hubs 6 881-6311-2Z 6 5/8-11 x 2” Machine Bolt Grade 8 (Standard Hitch Only) 7 881-5013-5Z 2 1/2-13 x 5” Machine Bolt Grade 8 (Pr
XT16-162-WS & XT16-202-WS FRAME AND O-BEAM SN 1416XT244 & LATER 4 8 11 12 9 12 10 5 3 20 7 21 19 16 1 15 13 18 6 17 2 22 14 Meyer Manufacturing Corporation 18 - 34 - PB-TRAILER
KEY PART NUMBER QTY DESCRIPTION 75-1607-1 1 XT16-162-WS Trailer Frame Assembly 75-1606-1 1 XT16-202-WS Trailer Frame Assembly 2 75-0074 1 Bolt on Hitch 3 956-3803 1 Jack 4 75-1606-3-1 1 Right O-Beam Assembly Less Hubs 75-1606-3 1 Right O-Beam Assembly W/Hubs 75-1606-2-1 1 Left O-Beam Assembly Less Hubs 75-1606-2 1 Left O-Beam Assembly W/Hubs 6 851-6311-2Z 6 5/8-11 x 2” Machine Bolt Grade 5 7 881-6311-5.
XT2200 SERIES FRAME PRIOR TO SN 0822201 1 2 7 4 8 3 6 5 Meyer Manufacturing Corporation - 36 - PB-TRAILER
KEY PART NUMBER QTY DESCRIPTION 75-2000 1 XT2200 Trailer Frame Assembly 75-2000-L 1 XT2200L Trailer Frame Assembly 75-2000-XL 1 XT2200XL Trailer Frame Assembly 2 75-2020 1 Plate, Brake Actuator Mount, Optional 3 956-3803 1 Jack 4 75-0074 1 Hitch Plate Assembly 5 881-6311-2Z 6 5/8-11 x 2” Machine Bolt Grade 8 6 885-6311-Z 6 5/8-11 Nylon Insert Locknut 7 901-3801-31 1 Adjustable Rear Hitch Mount Plate 8 52-0051 1 40,000# Capacity Safety Chain 1 PB-TRAILER - 37 - 1-800
XT22-264, XT22-240 & XT22-264 FRAME (WITHOUT 3-POINT SCALE) (SN 0822201 AND LATER) Prior to SN 0822225 5 4 1 7 6 7 2 8 6 4 9 5 3 Meyer Manufacturing Corporation - 38 - PB-TRAILER
KEY PART NUMBER 1 QTY DESCRIPTION 75-2219-1 1 XT22-216 Trailer Frame Assembly 75-2218-1 1 XT22-240 Trailer Frame Assembly 75-2217-1 1 XT22-264 Trailer Frame Assembly 2 75-2020 1 Plate, Brake Actuator Mount (Optional) 3 956-3803 1 Jack 4 75-0074 1 Hitch Plate Assembly (Prior to SN 0822225) 75-0076 1 Hitch Plate Assembly (SN 0822225 & Later) 75-2023 1 Clevis Hitch (SN 1422XT317 & Later) 881-6311-2Z 6 5/8-11 x 2” Machine Bolt Grade 8 (Prior to SN 0822225) 881-1014-2.
XT22-216-WS, XT22-240-WS & XT22-264-WS FRAME & O-BEAM 4 10 12 11 10 12 8 16 1 13 3 6 5 15 14 7 2 9 17 Meyer Manufacturing Corporation - 40 - PB-TRAILER
KEY PART NUMBER 1 QTY DESCRIPTION 75-2220-1 1 XT22-216-WS Trailer Frame Assembly 75-2221-1 1 XT22-240-WS Trailer Frame Assembly 75-2222-1 1 XT22-264-WS Trailer Frame Assembly 2 75-2023 1 Clevis Hitch (SN 1422XT317 & Later) 3 956-3803 1 Jack 4 75-2206-3-1 1 Right O-Beam Assembly Less Hubs 75-2206-3 1 Right O-Beam Assembly W/Hubs 75-2206-2-1 1 Left O-Beam Assembly Less Hubs 75-2206-2 1 Left O-Beam Assembly W/Hubs 6 881-6311-5.
XT2200 SERIES PRIOR TO SN 0822201 9 3 10 6 REAR 7 8 5 10 1 7 11 4 2 1 6 15 16 4 2 FRONT 8 12 14 5 Meyer Manufacturing Corporation - 42 - 13 3 PB-TRAILER
KEY PART NUMBER QTY DESCRIPTION 1 75-0111 4 3-1/2” Spindle Assembly 2 75-2000-20 2 XT2200 O-Beam Center Pivot Shaft Welded Assembly 3 901-3867-2 2 Tandem Locking Collar 4 901-3864-2 2 Pivot Shaft Nylon Bushing 5 30-0006 2 Zerk 1/8” NPT x 90° 6 30-0006 2 Zerk 1/8” NPT x 90° 7 30-0009 2 1/8” NPT Coupler 8 30-0008 2 1/8” NPT Nipple 9 933-3626 2 Copper Tube Grease Line 31” (Includes zerks, fittings) 10 30-0002 2 1/8” NPT Straight Zerk 11 75-2010 1 Right O-Beam W / O
XT2200 SERIES SN 0822201 & LATER 24 19 20 21 16 22 FRONT (LONG OFFSET) 24 26 22 22 21 24 22 REAR (SHORT OFFSET) 18 27 20 19 25 18 23 1 18 24 3 13 12 6 5 9 15 2 4 11 7 8 Meyer Manufacturing Corporation 10 14 - 44 - PB-TRAILER
KEY PART NUMBER QTY DESCRIPTION 1 75-0211 4 Hub Assembly Complete 15,000# 2 75-0211-2 1 Seal 3 75-0211-3 1 Bearing Cone 4 75-0211-4 1 Bearing Cup 5 75-0208-5 1 Bearing Cup 6 75-0208-6 1 Bearing Cone 7 75-0208-7 1 Washer 8 75-0208-8 1 Nut 9 75-0208-9 1 Cotter Pin 10 75-0208-10 1 Hub Cap 11 75-0208-11 10 Lug Nut - Flanged 12 75-0208-12 10 Stud Bolt 13 75-0211-1 1 Hub Only w/Races & Studs 14 75-0208-13 4 Hub Cap Bolt 15 75-0208-14 1 Hub Cap Gasket 1
HUB FOR XT1600 SERIES 2 0 3 4 1 12 5 6 7 9 8 10 11 KEY PART NUMBER QTY DESCRIPTION 0 75-0207 4 Hub Assembly Complete 1 75-0207-1 1 Hub W/Races 2 75-0207-2 1 Grease Seal 3 75-0207-3 1 Inner Wheel Bearing 4 75-0207-4 1 Inner Wheel Race 5 75-0202-4 1 Outer Wheel Race 6 75-0202-3 1 Outer Wheel Bearing 7 75-0205-7 1 Washer 8 75-0205-8 1 Nut 9 75-0205-9 1 Cotter Pin 10 75-0205-10 1 Cap 11 75-0205-11 8 Lug Nut 12 75-0207-12 8 Stud Bolt Meyer Manufacturin
HUB FOR XT2200 SERIES 2 3 4 1 13 12 5 6 7 9 8 15 10 14 11 KEY PART NUMBER 1 75-0211 QTY DESCRIPTION 1 Hub Assembly Complete 15,000# 75-0211-SC 1 Hub Assembly Complete 15,000# for Spindle Load Cell 2 75-0211-2 1 Seal 75-0211-2-SC 1 Double Lip Seal for Spindle Load Cell 3 75-0211-3 1 Bearing Cone 4 75-0211-4 1 Bearing Cup 5 75-0208-5 1 Bearing Cup 6 75-0208-6 1 Bearing Cone 7 75-0208-7 1 Washer 8 75-0208-8 1 Nut 9 75-0208-9 1 Cotter Pin 10 75-0208-10 1 Hub Cap
XT2200 SERIES OPTIONAL BRAKE PACKAGE (1 OF 3) PRIOR TO SN 0822225 SN 0822225 THROUGH SN 1422XT316 26A 26 9 26B 10 26B 26A 12 5 6 4 19 7 13 8 26 SN 1422XT317 & LATER 26B 26A 1 20 11 14 23 17 2 21 3 16 24 18 15 26 14 25 27 22 SN 1222208 & LATER 40 4 6 7 10 9 34 32 41 24 12 26 8 18 1 33 28 5 23 37 17 11 26A 26B 30 35 36 29 2 15 25 27 31 38 39 Meyer Manufacturing Corporation - 48 - PB-TRAILER
KEY PART NUMBER QTY 1 DESCRIPTION 1 57-0032 XT2200 Trailer Optional Brake Actuator (Prior to SN 1422XT317) 57-0038 1 XT2200 Trailer Optional Brake Actuator (SN 1422XT317 & Later) 2 57-0029-1 1 Spring Spacer 3 57-0029-2 12 Nylon Slide Bearing Button 4 *57-0029-3 1 Safety Break-Away Lever 5 *57-0029-4 1 Safety Break-Away Lock 6 57-0009-2 1 S-Hook (Heavy Stationary) 7 57-0030 1 Safety Break-Away Chain 96” 8 33-0032-1 1 S-Hook (Break-Away) 9 57-0029-5 2 5/16”-18 x 5/8” Ma
XT2200 SERIES OPTIONAL BRAKE PACKAGE (2 OF 3) PRIOR TO SN 0822225 SN 0822225 THROUGH SN 1422XT316 26A 26 9 26B 10 26B 26A 12 5 6 4 19 7 13 8 26 SN 1422XT317 & LATER 26B 26A 1 20 11 14 23 17 2 21 3 16 24 18 15 26 14 25 27 22 SN 1222208 & LATER 40 4 6 7 10 9 34 32 41 24 12 26 8 18 1 33 28 5 23 37 17 11 26A 26B 30 35 36 29 2 15 25 27 31 38 39 Meyer Manufacturing Corporation - 50 - PB-TRAILER
KEY PART NUMBER 36 57-0037-2 QTY DESCRIPTION 1 Inner Slide Tube 37 57-0037-3 1 Slide Channel Top 38 57-0037-4 1 Slide Channel Bottom 39 57-0037-5 2 Slide Spacer 40 57-0037-12 1 Master Cylinder Cap Assembly 41 57-0037-13 1 Master Cylinder Cork Gasket NS 57-0029-18 1 1-1/4” Master Cylinder Repair Kit NS 57-0029-19 1 Lever Replacement Kit (Includes Items W/*) NS 32-0024 AR 9/32” Brake line Loom Clamp NS 57-0010 AR 18” Hydraulic Brake Hose NS 57-0013 AR Frame Tee W/Cli
XT2200 SERIES OPTIONAL BRAKE PACKAGE (3 OF 3) 0 26 7 23 8 21 24 1 11 9 25 22 14 5 13 2 12 15 16 15 21 10 3 6 13 20 4 19 18 14 17 15 16 15 Meyer Manufacturing Corporation - 52 - PB-TRAILER
KEY PART NUMBER QTY DESCRIPTION 0 57-0002 1 13” RH Free Backing Brake Assembly 57-0003 1 13” LH Free Backing Brake Assembly 1 57-0002-2 1 Back Plate Assembly 2 57-0002-3 1 Brake Shoe Assembly 3 57-0002-4 1 Shoe Lever 4 57-0002-5 1 Shoe Assembly 5 57-0003-1 1 Wheel Cylinder Assembly Left 57-0002-1 1 Wheel Cylinder Assembly Right (Not Shown) 6 57-0002-6 1 Push Rod 7 57-0002-7 2 5/16”-18 UNC x 1/2” H.H.M.B.
Meyer Manufacturing Corporation - 54 - PB-TRAILER
9.0 SPECIFICATIONS SUSPENSION TRAILER SPECIFICATIONS MODEL XT1600 XT1600L XT2200 XT2200L XT2200XL Style Tandem Tandem Long Tandem Tandem Long Tandem Long Capacity 32,000# 32,000# 44,000# 44,000# 44,000# Tread Width 82” 82” 80” 80” 80” Spindle Size 3” 3” 3.5” 3.5” 3.
TRAILER AND BOX MOUNTING SPECIFICATION SHEET BOXES / TRAILERS XT1600 XT1600L XT2200 4516 OK NA NA 4518 NA OK NA 4616 OK NA NA 4618 NA OK NA 4620 NA OK OK 4622 NA NA OK 4116 OK NA NA 4118 OK NA NA 4120 NA OK OK 4122 NA NA OK 4216 OK NA NA 4218 NA OK NA 4220 NA OK OK 4222 NA NA OK 6218 NA OK NA 6220 NA NA OK 6222 NA NA NA 6224 NA NA NA 3514 OK NA NA 3516 OK NA NA 3518 NA OK NA 3516-FB OK NA NA 3518-FB NA OK NA 3116 OK NA NA 3118 OK NA NA 3120 NA OK OK 3216 OK NA NA 3218 NA OK NA 3220 NA OK OK 8118 NA NA OK 81
NOTES
NOTES
MAINTENANCE RECORD MODEL NO. ____________________________________ DATE SERVICE PERFORMED SERIAL NO. ____________________________________ DATE Manufactured by: Meyer Manufacturing Corporation 574 West Center Avenue Dorchester, WI 54425 Phone: 1-800-325-9103 Fax: 715-654-5513 Email: sales@meyermfg.com Website: www.meyermfg.
Meyer Manufacturing Corporation 574 West Center Avenue Dorchester, WI 54425 Phone: 1-800-325-9103 Fax: 715-654-5513 Email: sales@meyermfg.com Website: www.meyermfg.
