Specifications

Model V-Force —31—
RH AUGER DRIVE, FINAL REDUCTION
KEY PART NO. DESCRIPTION
1 33-0025 2-1/2" Retaining Ring
2 910-0064 Welded Sprocket Assy, LH,
80A60x120A9
3 910-0101 Shear Sprocket Assy.
120B33 (Standard 7500, Op
-
tional 7400)
831-5020-1.75 ½-20 x 1-3/4" Allen Head
Cap Screw Grade 8 (Stan
-
dard)
884-5020 ½-20 Top Locknut Grade 8
(Standard)
831-5618-1.75 9/16-18 x 1-3/4" Allen Head
Cap Screw Grade 8 (Op
-
tional)
884-5618 9/16-18 Top Locknut Grade
8 (Optional)
910-0028 120B33 Spline Sprocket
(Standard 7400)
4 813-3118-Z 5/16" Regular Nut
5 933-3804 5/16"x4" Full Thread Eye
Bolt
6 913-3801-1 Auger Bushing Only 2-1/2"
ID x 2-3/4" OD x 2 3/4" Long
KEY PART NO. DESCRIPTION
7 925-3834 Front Auger Bearing Plate
Assy. With Bushing, RH
8 933-3621 3/4" Jam Nut
9 808-.75-1.25-14 Machine Bushing, 14GA
10 912-0013 Tightener Roller, 2" Nylon
Complete
10A 912-0013-1 Nylon Roller Only
10B 912-0013-2 Inner Sleeve
11 925-3848-7 Tightener Arm Welded Assy
12 929-3601 Spring
13 911-0023 Chain #120x56 pitches
14 851-7510-3.5Z 3/4"-10x3 ½" Bolt, GR5
15 805-0010-Z 1" Flat Washer
16 38-0013 5/16"x1-3/4" Roll Pin
17 925-3822-6 2 Links 3/16" Proof Coil
Chain
18 933-3619 Copper Tube Grease Line
28" (includes zerk, fittings)
19 925-3848 Tightener Arm Assembly
Complete
Install (#120-56) Roller Chain, Key #13
W/Connector Link Cotter Pins Facing
Towards Front
Of Spreader.