Owner`s manual

PB-SV - 75 -
918-0308 PTO DRIVE SHAFT ASSEMBLY
1-3/8” 21 SPLINE S.P. (FACTORY BUILT 1000 RPM, NOT KIT EQUIPPED)
WWE2480 (80° C.V.)
918-0310 PTO DRIVE SHAFT ASSEMBLY
1-3/4” 20 SPLINE S.P. (OPTIONAL) (FACTORY BUILT 1000 RPM, NOT KIT EQUIPPED)
WWE2480 (80° C.V.)
KEY MEYER PART NO. DESCRIPTION
1 918-0208-1-1 Yoke 1-3/8”-21 Splined
Assembly
918-0210-1-1 Yoke 1-3/4”-20 Splined
Assembly
2 918-0208-1-2 Grease Zerk in items 3 & 9
3 918-0208-1-3 Double Yoke
4 918-0308-1-1 Inboard Yoke Star Profile
5 918-0208-1-5 Cross and Bearing Kit
5A 918-0208-1-5-1 M8x1 67.5° Zerk In Cross &
Bearing Kit
6 918-0208-1-6 Spring Pin 10 x 80 mm
7 918-0208-2-1 Cross and Bearing Kit
8 918-0308-1-2 Profile S5 and Sleeve Welded
Assy
9 918-0308-2-1 Overrunning Clutch & S4LGA
Profile Assy
10 918-0208-2-3-1 Clamping Cone Locking Pin
11 918-0308-2-2 Cut Out Clutch
12 918-0208-2-4 Bearing Ring SC25
13 918-0308-2-3 Outer Shield Tube OVL
14 918-0308-2-4 Inner shield Tube Round
15 918-0308-1-3 CV Cone & Bearing Assy.
16 918-0308-1-4 Shield Cone 3 Rib
17 918-0308-2-5 Shield Cone 8 Rib
18 918-0208-2-7 Safety Chain
19 918-0208-2-8 Decal Out-In Item 13
20 918-0208-1-10 Decal Inner-In Item 8
21 918-0208-2-9 Screw-In Item 15,16 & 17
KEY MEYER PART NO. DESCRIPTION
22 918-0208-1-11 Support Bearing
23 918-0208-1-12 Zerk-In Item 8
24 918-0208-1-13 Cross and Bearing Kit
25 918-0208-2-10 Decal-K64
26 918-0308-1 1-3/8-21 Spline Tractor Half
Assy
918-0310-1 1-3/4” 20 Spline Tractor Half
Assembly
27 918-0308-2 1000 RPM Implement 1/2
Assy
28 918-0208-1-1-1 1-3/8” Assembly Collar Kit
(Inc. Ring, Collar & Balls)
918-0210-1-1-1 1-3/4" Assembly Collar Kit
(Inc. Ring, Collar & Balls)
29 918-0308-2-1-1-5 Over-running Clutch Housing
30 918-0308-2-1-10 Over-running Clutch Hub
31 18-0119-1-1-2 Over-running Clutch Key
32 18-0119-1-1-1 Over-running Clutch Leaf
Spring
33 918-0308-2-1-3 Over-running Clutch
Supporting Ring
34 18-0119-1-1-6 Over-running Clutch Retaining
Ring
35 918-0308-2-1-8 Profile Tube - S4LGA
36 918-0308-2-1-12 Spring Pin, 10 x 55
37 918-0208-1-2 Grease Zerk
38 918-0308-2-1-11 Bearing Ring
39 918-0308-2-6 Lubrication Decal
KEY MEYER PART NO. DESCRIPTION
1 918-0308-2-2-1 Housing
2 918-0308-2-2-2 Hub (Prior to serial
#SI088720425)
618-0003-2-1 Hub (Serial
#SI088720426 & Later)
3 918-0308-2-2-3 Spring Pack
4 918-0208-2-3-5 Washer
5 918-0208-2-3-6 Retaining Ring
6 918-0208-2-3-7 Sealing Ring
7 918-0208-2-3-1 Clamp Cone Locking Pin
8 918-0308-2-2-4 Cam
NS 918-0208-2-3-9 Bushing-In Item #2
NS 918-0208-2-3-11 Shim Kit