Owner`s manual

PB-SV - 71 -
918-0309 PTO DRIVE SHAFT ASSEMBLY
1000 RPM 1-3/8”, 21 SPLINE S.P. (STANDARD)
918-0311 PTO DRIVE SHAFT ASSEMBLY
1000 RPM 1-3/4”, 20 SPLINE (OPTIONAL)
WWE2480 (80° C.V.)
SERIAL NUMBERS 08 AND LATER WITH 1000 RPM ADD-ON KIT
KEY MEYER PART NO. DESCRIPTION
1 918-0208-1-1 Yoke 1 3/8”-21 Splined Assembly-Standard
918-0210-1-1 Yoke 1 3/4”-20 Splined Assembly-Optional
2 918-0208-1-2 Grease Zerk in item 3
3 918-0208-1-3 Double Yoke
4 918-0308-1-1 Inboard Yoke
5 918-0208-1-5 Cross and Bearing Kit
5A 918-0208-1-5-1 M8x1 67.5° Zerk In Cross & Bearing Kit
6 918-0208-1-6 Spring Pin 10 x 80
7 918-0208-2-1 Cross and Bearing Kit
8 918-0309-1-2 Profile and Sleeve Welded Assy. 6” Shorter
918-0311-1-2 Profile and Sleeve Welded Assy. 4” Shorter
9 918-0309-2-2 Overrunning Clutch & S4LGA Profile Assy. 6” Shorter
918-0311-2-2 Overrunning Clutch & S4LGA Profile Assy. 4” Shorter
10 918-0208-2-3-1 Clamping Cone Bolt (Included in Item 11)
11 918-0308-2-2 Cut Out Clutch 2200NM
12 918-0208-2-4 Bearing Ring SC25
13 918-0309-2-3 Outer Shield Tube OVL 6” Shorter
14 918-0309-1-1 Inner shield Tube Round 4” Shorter
15 918-0308-1-3 CV Cone & Bearing Assy.
16 918-0308-1-4 Shield Cone 3 Rib
17 918-0308-2-5 Shield Cone 8 Rib
18 918-0208-2-7 Safety Chain
19 918-0208-2-8 Decal Out-In Item 13
20 918-0208-1-10 Decal In-In Item 8
21 918-0208-2-9 Screw-In Item 15,16 & 17
22 918-0208-1-11 Support Bearing
23 918-0208-1-12 Zerk-In Item 8
24 918-0208-1-13 Cross and Bearing Kit
25 918-0208-2-10 Decal-K64
26 918-0309-1 1 3/8-21 (Std) Spline Tractor 1/2 Assembly-6” Shorter -Star Profile
918-0311-1 1 3/4-20 (Optional) Spline Tractor 1/2 Assembly-4” Shorter-Star Profile
27 918-0309-2-S 1000 RPM Cutout Clutch Implement 1/2 Assy. 6” Shorter-Star Profile 1 3/8-21
918-0309-2 1000 RPM Cutout Clutch Implement 1/2 Assy. 4” Shorter-Star Profile 1 3/4-20
28 918-0210-1-1-1 AS-Lock Kit For Item 1 (Inc. Ring, Collar & Balls) 1 3/4-20 Spline
918-0208-1-1-1 AS-Lock Kit For Item 1 (Inc. Ring, Collar & Balls) 1 3/8-21 Spline
29 918-0308-2-1-1-5 Over-running Clutch Housing
30 918-0308-2-1-10 Over-running Clutch Hub
31 18-0119-1-1-2 Over-running Clutch Key
32 18-0119-1-1-1 Over-running Clutch Leaf Spring
33 918-0308-2-1-3 Over-running Clutch Supporting Ring
34 18-0119-1-1-6 Over-running Clutch Retaining Ring
35 918-0309-2-1-8 Profile Tube - S4LGA 6” Shorter
918-0311-2-1-8 Profile Tube - S4LGA 4” Shorter
36 918-0308-2-1-12 Spring Pin, 10 x 55
37 918-0208-1-2 Grease Zerk
38 918-0308-2-1-11 Bearing Ring
39 918-0308-2-6 Lubrication Decal