Owner`s manual

PB-SV - 49 -
SPINNERS & GEARBOX SHAFT DRIVE
KEY PART NO. DESCRIPTION
1 901-3834-1 RH, 4-Point Tooth Paddle, 3/8”, 4 or 3 Per RH Spinner (Lower), 2 or 1 Per LH (Upper)
2 901-3835-1 LH, 4-Point Tooth Paddle, 3/8”, 4 or 3 Per LH Spinner (Lower) 2 or 1 Per RH (Upper)
3 19-0041 Gearbox, Left, Cast
851-5013-1.5Z 1/2”-13 x 1-1/2” Grade 5 M.B. Mount Bolts
828-0050-Z 1/2” SAE Washer (2-per bolt)
806-0050-Z 1/2” Internal Tooth Lockwasher
4 935-0002 5/16” x 5/16” x 2 1/4” Hardened Key
5 937-0014-1 Shaft Coupler, 1-3/8” Bore (4 Required)
6 19-0042 Gearbox, Center w/Thru Shaft, Cast
851-5013-1.5Z 1/2”-13 x 1-1/2” Grade 5 M.B. Mount Bolts
828-0050-Z 1/2” SAE Washer (2-per bolt)
806-0050-Z 1/2” Internal Tooth Lockwasher
7 19-0043 Gearbox, Right, Cast (540 RPM, 1000 RPM Kit) 1:1 Ratio
19-0048 Gearbox, Right, Cast (1000 RPM) 1:1.35 Ratio
851-5013-1.5Z 1/2”-13 x 1-1/2” Grade 5 M.B. Mount Bolts
828-0050-Z 1/2” SAE Washer (2-per bolt)
806-0050-Z 1/2” Internal Tooth Lockwasher
8 901-3856-1 RH Spinner Assy, Less Paddles w/Bottom Shaft (Prior to 08 Serial #'s)
901-3897-1 RH Spinner Assy, Less Paddles w/Bottom Shaft (08 Serial #'s & Later)
8a 901-3856-3 RH Paddle Backing Plate
8b 901-3855-5 Spinner Bottom Plate
9 901-3855-1 LH Spinner Assy, Less Paddles w/Bottom Shaft (Prior to 08 Serial #'s)
901-3896-1 LH Spinner Assy, Less Paddles w/Bottom Shaft (08 Serial #'s & Later)
9a 901-3855-1-14 LH Paddle Backing Plate
10 914-3604 Bearing 4 Bolt Flange 1-3/8” Bore-Ductile
851-5013-1.5Z 1/2” x 1-1/2” Hex Bolt
810-5013-Z 1/2” Spin Lock Nut
11 901-3855-8 Bottom Spinner Shaft
12 924-3817 Rear Shield Assembly (Prior to 08 Serial #'s)
924-5011 Rear Shield Assembly (08 Serial #'s & Later)
13 924-3818 RR Shield Assembly
14 111-0060-18-CC Coupler Chain
15 808-1.38-2.5-14 Machine Bushing, 14GA
808-1.38-2.5-18 Machine Bushing, 18GA
808-1.38-2.5-10 Machine Bushing, 10GA
16 901-3855-4 Splined Hub
17 851-5013-1.25Z 1/2”-13 x 1-1/4” Bolt, GR5
18 815-5013Z 1/2”-13 Nylon Insert Lock Nut
19 921-0001 1-3/8” One Piece Set Collar
20 32-0021 2” Hairpin Clip (Prior to 08 Serial #'s)
21 32-0022 6” Lanyard (Prior to 08 Serial #'s)
22 32-0023 3/8x3/4 Clevis Pin (Prior to 08 Serial #'s)
23 933-3626 Copper Tube Grease Line 31”
24 933-3625 Copper Tube Grease Line 55” (Includes zerk, fittings)
25 937-0002 Shaft Coupler, 1-3/8” Bore with 5/16” KWY w/4 Set Screws
26 35-0017 5/16” x 5/16” x 4 1/2” Key
27 901-3834-2 Left Hand Paddle Mount Brackets
28 901-3835-2 Right Hand Paddle Mount Brackets
29 937-0014 1 3/8” Coupler Assy. Kit w/Chain & Keys
30 32-0032 3-1/2” Rubber T-Latch w/catch (08 Serial # & Later)
31 901-3855-1-13 Left Lower Bolt On Paddle
32 901-3856-2 Right Lower Bolt On Paddle