Owner`s manual

PB-SV - 39 -
LH AUGER DRIVE, FINAL REDUCTION
KEY PART NO. DESCRIPTION
1 14-0031 Bearing, 4 Bolt Flange, 2” Bore
2 925-3873 Front Bearing Mounting Plate (540 RPM, 1000 RPM Kit)
925-3873-RPM Front Bearing Mounting Plate (1000 RPM)
3 910-0064 Welded Sprocket Assy, LH, 80A60 x 120A9 (540 RPM, 1000 RPM Kit)
910-0064-RPM Welded Sprocket Assy, LH, 80A80 x 120A9 (1000 RPM)
4 808-.75-1.25-14 Machine Bushing, 14GA
5 925-3846-2 4” Snugulator Support Arm Assy
6 851-7510-6Z 3/4”-10 x 6" Bolt, GR5
7 925-3870-1 Bearing Back Plate
8 914-3807A-IND Bearing, 4-Bolt, 2-1/2” Bore
9 925-3833 LH Front Auger Bearing Plate Assy W/Bushing (Prior to SN SV142636355)
925-5010 LH Front Auger Bearing Plate Assy W/Bushing (SN SV142636355 & Later)
10 913-3801-1 Auger Bushing Only 2-1/2” ID x 2-3/4” OD x 2 3/4” Long (Prior to SN SV142636355)
913-3705 Nylatron Auger Bushing 2.525” ID x 3.258” OD x 2.75”
11 813-7510-Z 3/4” Nut, Regular
12 933-3621 3/4” Jam Nut
13 925-3841 Spring Tightener Guide
14 29-0009 Spring, Compression
15 925-3885-1 Main Tightener Channel
16 925-3843 Inner Slide Nut Assembly
17 925-3839 3/4” x 8 1/2” Bolt Assy
18 912-0014 Tightener Roller, 4” Nylon Complete
18A 912-0014-1 Nylon Roller Only
18B 912-0014-2 Inner Sleeve
19 911-0024 Chain #120 x 72 pitches
19A 911-0026 #120 Connector Link Only
20 912-0001 Nylon Roller
21 925-3838 Tightener Weldment Yoke
22 925-3842 Outer Slide Nut Assembly
23 910-0028 120B33 Spline Sprocket
910-0101 Shear Sprocket Assy 120B33 (Prior to SV112636402 & SV123954243 & Later)
831-4420-1.75 7/16”-20 x 1-3/4" Allen Head Cap Screw Grade 8 (SV073954331-335 Only)
884-4420 7/16”-20 Top Locknut Grade 8 (SV073954331-335 Only)
831-5020-1.75 1/2”-20 x 1-3/4” Allen Head Cap Screw Grade 8 (SV073954331-335, 350 & Later)
884-5020 1/2”-20 Top Locknut Grade 8
831-5618-1.75 9/16”-18 x 1-3/4” Allen Head Cap Screw Grade 8 (SV073954350 & Later)
884-5618 9/16”-18 Top Locknut Grade 8
910-0105 Shear Sprocket Assy. 120B33, 14 Hole (SV112636402 Thru SV123954242)
831-5013-1.75 1/2-13 x 1-3/4” Allen Head Cap Screw Grade 8 (Standard Protection with 910-0105 Sprocket)
884-5013 1/2-13 Top Locknut Grade 8
831-5020-1.75 1/2-20 x 1-3/4” Allen Head Cap Screw Grade 8 (Less Protection with 910-0105 Sprocket)
884-5020 1/2-20 Top Locknut Grade 8
24 33-0025 2-1/2” Retaining Ring
25 925-3807-3 Nylon Roller Retaining Washer
26 851-5013-1.25Z 1/2”-13 x 1.25” Bolt, GR5
27 808-1.25-1.875-10 Machine Bushing, 10GA
28 925-3816-2 Chain Hold Down Bracket
29 925-3816 Roller Assembly Complete
30 925-3869 Support For Bearing
31 30-0009 1/8” NPT Coupler
32 30-0014 1/8” NPT x 3 1/2” Nipple
33 30-0002 1/8” NPT Zerk
34 933-3637 Copper Tube Grease Line 51" (includes zerk, fittings)
35 808-2.5-3.5-14 14 GA x 2.5” ID x 3.5” OD Flat Washer
36 925-3881-1 2nd Reduction Pivot Shaft Weldment
37 925-3880-1 1st Reduction Pivot Shaft Tightener Weldment
38 910-0101-1 Shear Plate & Hub
39 910-0101-2 Auger Sprocket Washer