Owner`s manual
PB-SV - 37 -
RH AUGER DRIVE, FINAL REDUCTION
KEY PART NO. DESCRIPTION
1
33-0025 2-1/2” Retaining Ring
2
910-0064 Welded Sprocket Assy, LH, 80A60 x 120A9 (540 RPM, 1000 RPM Kit)
910-0064-RPM Welded Sprocket Assy, LH, 80A80 x 120A9 (1000 RPM)
3
910-0028 Auger Sprocket 120B33, Splined-Nonshear
910-0101 Shear Sprocket Assy. 120B33 (Prior to SN SV112636402 & SV123954243 & Later)
831-4420-1.75 7/16”-20 x 1-3/4” Allen Head Cap Screw Grade 8 (SV073954331-335 Only)
884-4420 7/16”-20 Top Locknut Grade 8 (SV073954331-335 Only)
831-5020-1.75 1/2”-20 x 1-3/4” Allen Head Cap Screw Grade 8 (SV073954331-335, 350 & Later)
884-5020 1/2”-20 Top Locknut Grade 8 (SV073954331-335, 350 & Later)
831-5618-1.75 9/16”-18 x 1-3/4” Allen Head Cap Screw Grade 8 (SV073954350 & Later)
884-5618 9/16”-18 Top Locknut Grade 8 (SV073954350 & Later)
910-0105 Shear Sprocket Assembly 120B33, 14 hole (SV112636402 Thru SV123954242)
831-5013-1.75 1/2”-13 x 1-3/4” Allen head Cap Screw Grade 8 (Standard protection with 910-0105 sprocket)
884-5013 1/2”-13 Top Locknut Grade 8
831-5020-1.75 1/2”-20 x 1-3/4” Allen Head Cap Screw Grade 8 (Less protection with 910-0105 sprocket)
884-5020 1/2”-20 Top Locknut Grade 8
831-5013-1.75 1/2”-13 x 1-3/4” Allen head Cap Screw Grade 8 (Standard protection with 910-0105 sprocket)
884-5013 1/2”-13 Top Locknut Grade 8
831-5020-1.75 1/2”-20 x 1-3/4” Allen Head Cap Screw Grade 8 (Less protection with 910-0105 sprocket)
884-5020 1/2”-20 Top Locknut Grade 8
4
813-3118-Z 5/16” Regular Nut
5
933-3804 5/16” x 4” Full Thread Eye Bolt
6
913-3801-1 Auger Bushing Only 2-1/2” ID x 2-3/4” OD x 2 3/4” Long (Prior to SN SV142636355)
913-3705 Nylatron Auger Bushing 2.525 ID x 3.258 OD x 2.75” (SN SV142636355 & Later)
7
925-3834 RH Front Auger Bearing Plate Assy W/Bushing (Prior to SN SV142636355)
925-5011 RH Front Auger Bearing Plate Assy W/Bushing (SN SV142636355 & Later)
8
933-3621 3/4” Jam Nut
9
808-.75-1.25-14 Machine Bushing, 14GA
10
912-0013 Tightener Roller, 2” Nylon Complete
10A
912-0013-1 Nylon Roller Only
10B
912-0013-2 Inner Sleeve
11
925-3848-7 Tightener Arm Welded Assy
12
929-3601 Spring
13
911-0023 Chain #120 x 56 pitches
14
851-7510-3.5Z 3/4”-10 x 3 1/2” Bolt, GR5
15
805-0010-Z 1” Flat Washer
16
38-0013 5/16” x 1-3/4” Roll Pin
17 925-3822-6 2 Links 3/16” Proof Coil Chain
18
933-3619 Copper Tube Grease Line 28” (includes zerk, fittings)
19
925-3848 Tightener Arm Assembly Complete
20
808-2.5-3.5-14 14 GA x 2-1/2” ID x 3-1/2” OD Flat Washer