Owner`s manual

PB-SV - 35 -
AUGER DRIVE, SECONDARY REDUCTION
KEY PART NO. DESCRIPTION
1 14-0031 Bearing, 4 Bolt, 2” Bore
2 38-0013 Roll Pin, 5/16” x 1-3/4”
3 910-0063 Welded Sprocket Assy, RH, 80A60 x 80A12 (540 RPM, 1000 RPM Kit)
910-0063-RPM Welded Sprocket Assy, RH, 80A80 x 80A12 (1000 RPM)
4 851-7510-3Z 3/4"-10x3” Bolt, GR5
5 911-0018 Chain #80 x 73 pitches (540 RPM, 1000 RPM Kit)
911-0073 Chain #80 x 87 pitches (1000 RPM)
6 912-0013 Tightener Roller 2” Nylon Complete
6A 912-0013-1 Nylon Roller Only
6B 912-0013-2 Inner sleeve
7 808-.75-1.25-14 Machine Bushing, 14GA
8 925-3884-1 2nd Reduction Tightner Arm Weldment (540 RPM)
925-3884-1-RPM 2nd Reduction Tightener Arm Weldment (1000 RPM)
9 813-3118-Z 5/16" Regular Nut
10 933-3804 5/16” x 4” Full Thread Eye Bolt
11 925-3822-6 2 Links 3/16” Proof Coil Chain (Prior To SN SV063245240)
12 929-0003 Spring
13 808-1-1.5-18 Machine Bushing, 18GA
14 910-0064 Welded Sprocket Assy, LH, 80A/60 x 120A/9 (540 RPM, 1000 RPM Kit)
910-0064-RPM Welded Sprocket Assy, LH, 80A80 x 120A9 (1000 RPM)
15 925-3884 Tightener Assembly Complete (540 RPM, 1000 RPM Kit)
925-3884-RPM Tightener Assembly Complete (1000 RPM)
16 30-0009 1/8” NPT Coupler
17 30-0014 1/8” NPT x 3 1/2” Nipple
18 30-0002 1/8” NPT Zerk