Owner`s manual

PB-SV - 33 -
AUGER DRIVE, PRIMARY REDUCTION
KEY PART NO. DESCRIPTION
1 933-3628 Copper Tube Grease Line 25” (includes zerk, fittings)
2 38-0013 Roll Pin, 5/16” x 1-3/4”
3 925-3883-1 First Reduction Tightener Assembly Arm Weldment (540, Optional 1000 RPM Kit)
925-5015-1 First Reduction Tightener Assembly Arm Weldment (1000 RPM)
3A 925-5017 Pivot Mount Plate Assy. (1000 RPM)
3B 925-5017-3 Pivot Shaft Only (1000 RPM)
4 808-.75-1.25-14 Machine Bushing, 14GA
5 912-0012 Tightener Roller 1-3/8” Nylon Complete
5A 912-0012-1 Nylon Roller Only
5B 912-0012-2 Inner Sleeve
6 851-7510-2Z 3/4”-10 x 2” Bolt, GR5 (540 RPM, 1000 RPM Kit)
925-3717-3 3/4”-10 x 2-1/4” Bolt, GR5 Machined - Special (1000 RPM)
7 911-0032 Chain #80 x 86 Pitches (540 RPM, 1000 RPM Kit)
911-0072 Chain #80 x 99 Pitches (1000 RPM)
8 910-0039 Sprocket 80B22 1-1/2" Bore, 3/8" Keyway (10 RPM on Augers) STANDARD
910-0033 Sprocket 80B15 1-1/2” Bore, 3/8” Keyway (7 RPM on Augers)
910-0005 Sprocket 80B12 1-1/2” Bore, 3/8” Keyway (5 RPM on Augers)
9 914-3602 Bearing 4 Bolt Flange, 1-1/2” Bore
10 925-3606 Front Bearing Plate-Bent
11 925-3883 1st Reduction Tightener Arm Assy (540 RPM, 1000 RPM Kit)
925-5015 1st Reduction Tightener Arm Assy (1000 RPM Models)
12 931-3810 CV/OR PTO Shied Assembly
13 923-3833 CV/OR Input Drive Shaft-Splined 16-3/4” Long
923-3833-XL CV/OR Input Drive Shaft (Optional 19” Ext Hitch)
14 910-0063 Welded Sprocket Assy, RH, 80A60x80A12 (540 RPM, 1000 RPM Kit)
910-0063-RPM Welded Sprocket Assy, RH, 80A80x80A12 (1000 RPM)
15 813-3118-Z 5/16” Regular Nut
16 933-3804 5/16” x 4” Full Thread Eye Bolt
17 925-3822-6 2 Links 3/16" Proof Coil Chain (Prior To SN SV063245240)
18 929-0003 Spring
19 808-1-1.5-18 Machine Bushing, 18GA (AR)
20 35-0010 3/8” x 3/8” x 1-1/2” Square Key
21 933-3632 Copper Tube Grease Line 37” (includes zerk fittings)
22 935-0001 3/8” x 3/8” x 2” Hardened Key