Owner`s manual

MEYER®/DIAMOND® SNOW PLOWS
LIMITED WARRANTY EFFECTIVE AUGUST 1, 2006
(Continued from reverse side)
What Meyer Products Will Do:
Meyer Products will repair any product that proves to be defective in materials or workmanship. In the event repair is not possible or practical (as determined by Meyer Products in its sole discretion), Meyer Products will either replace the product with a new product of similar model and price, or refund the full purchase price, as determined by Meyer Products.
Customer Responsibilities:
Customer must keep the complete Snow Plow Package serviced/maintained as recommended by Meyer Products. A written record of service must be maintained, along with receipts for maintenance materials purchased. A copy of the maintenance record and pertinent receipts may be requested in the event of a claim.
How To Get Service:
In order to obtain service under this warranty, the original purchaser must: • Use all reasonable means to protect the complete snow plow package from further damage; • Return the claimed defective part to the Meyer®/Diamond® Distributor/Sub-Distributor from
whom the product was purchased or to any authorized Meyer®/Diamond® Distributor/Sub- Distributor, transportation and freight charges prepaid. Only Meyer®/Diamond® Distributors/ Sub-Distributors are authorized to perform the obligations under this warranty. For the address and telephone number of the Meyer®/Diamond® Distributor/Sub-Distributor nearest you, check the telephone directory, go to www.meyerproducts.com, write us at the address below, or call [phone] for assistance;
• Provide maintenance record and receipts for required maintenance, if requested; • Allow inspection of damaged parts and/or complete snow plow package if deemed necessary
by Meyer Products.
• It is the responsibility of the original purchaser to establish the warranty period by verifying the
original delivery date. A bill of sale/sales receipt, cancelled check or some other appropriate payment record may be kept for that purpose.
How State Law Applies:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
How to register your Meyer/Diamond Plow to receive the ROC Solid Warranty
Go to www.meyerproducts.com and click on the link to register your plow. Fill out the information on the form as required. The serial number location of the moldboard is shown in Figure 1. The serial number location of the hydraulic unit is shown in Figure 2. Fill out the remainder of the information to complete the registration.
MEYER PRODUCTS LLC
18513 Euclid Avenue • Cleveland, Ohio 44112-1084
www.meyerproducts.com • e-mail [e-mail]