Owner`s manual

38
RUBBER EDGES W/HARDWARE (CONT.)
08187 ST-6.5
08188 ST-7.0 / STP-7.0
08189 ST-7.5 / STP-7.5 / C-7.5 / CP-7.5
08190 C-8.0 / CP-8.0
08191 C-8.5 / CP-8.5
08192 C-9.0 / HM-9.0
08193 HM-10.0
SNOWPLOW HARDWARE
07107 CLIP SPRING
09124 EYE BOLT & NUTS
12978 TRIP SPRING TM
07017 TRIP SPRING ST / C / HM
08433 EXTRA TRIP SPRING KIT
09916 MARKER KIT
13591 KING BOLT W/GREASE FIT.
09122 KING BOLT 5/8”
09125 KING BOLT 3/4”
13598 PIVOT BOLT W/GREASE FIT. TM
08541 PIVOT PIN W/COTTER (2)
08554 PIVOT PIN W/GREASE FIT. (2)
13003 SECTOR PIN 5/8”
13004 SECTOR PIN 3/4”
08562 HINGE PIN W/COTTER (2) TM
SNOWPLOW HARDWARE (CONT.)
08575 HINGE PIN W/COTTER (2)
10958 HINGE PIN (ONLY) HM-SERIES
08543 HAIRPIN COTTER (2)
08498 QUICK DISCONNECT W/COTTER
08667 LINCH PIN (2)
08669 HINGE PIN (11006) W/PIN (2)
08670 HINGE PIN (11001) W/PIN (2)
RUNNERS & SPINDLES
08514 RUNNER KIT COMPLETE TM
09127 TM RUNNER ASSEMBLY
09126 ST-6.5 / C-9.0 ASSEMBLY
09592 HM-9.0 / HM-10.0 ASSEMBLY
07006 RUNNER ONLY ST-6.5 / C-9.0
07086 RUNNER ONLY HM - SERIES
12057 SPINDLE ASSY ST-6.5 / HM-10
22083 LINCHPIN
20363 WASHER ST-6.5 / HM-10.0
20420 COTTER PIN 1/4” X 2”
TWO METER A-FRAMES
13594 TM A-FRAME
BRUSH GUARDS
11937 JEEP(TJ)
11558 TM
11559 ST THRU C
A-FRAMES FOR ST-6.5 / STP-7.5
13299 BRONCO/CJ/HAT 31” X 17 1/2”
13302 J-SERIES 72/78 37” X 17 1/2”
13304 U.B.F. 31” X 23 1/2”
13306 4/WD CUSTOM 38” X 23 1/2”
13568 J-SERIES 79/88 40” X 17 1/2”
13607 EZ - CUSTOM 31” X 23 1/2”
13612 EZ - CUSTOM 34” X 23 1/2”
13635 EZ - CUSTOM (STL) 34” X 23 1/2”
A-FRAMES FOR C-7.5 / HM-10.0
13319 4/WD CUSTOM 39” X 23 1/2”
13324 J-20 72/78 36” X 17 1/2”
13396 H.A.T. 29” X 17 1/2”
13556 U.B.F. 31” X 23 1/2”
13569 J-20 79/88 40” X 17 1/2”
13604 H.M.B.F. 31” X 28”
13606 H.M.B.A. 31” X 23 1/2”
13608 EZ - CUSTOM 31” X 23 1/2” 12” RAMS
13770 EZ - CUSTOM 31” X 23 1/2” 10” RAMS
A FRAMES for Plus & MDII
13711 (11”) 34” X 22 1/4”
13715 (15”) 31” X 22 1/4”
13720 (STL) 34” X 22 1/4”