Owner`s manual

Model 8720 / 8865 -7-
2. MANUFACTURER’S WARRANTY
11/2014 2014
MEYER INDUSTRIAL SPREADER
I. The “Owner’s Registration Form” must be completed in full and promptly returned to Meyer Mfg. Corp. for this
warranty to become both valid and effective. All warranties on new Meyer Industrial Spreaders shall apply only to
the original retail customer from an authorized Meyer Mfg. Corp. dealership.
II. This warranty shall not apply to any Meyer Industrial Spreader which has been subjected to misuse, negligence,
alteration, accident, incorrect operating procedures, has been used for an application not designed for or pre-
authorized by Meyer in writing, has had the serial numbers altered, or which shall have been repaired with parts
other than those obtained through Meyer Mfg. Corp. Meyer is not responsible for the following: Depreciation or
damage caused by normal wear, lack of reasonable and proper maintenance, failure to follow the operator’s
manual recommendations or normal maintenance parts and service. Meyer is not responsible for rental of
replacement equipment during warranty repairs, damage to a power unit (including but not limited to a truck or
tractor), loss of earnings due to equipment down time, or damage to equipment while in transit to or from the
factory or dealer.
III. Meyer Mfg. Corp. warrants new Meyer Industrial Spreaders to be free from defects in material and workmanship
under recommended use and maintenance service, as stated in the “Owner / Operator’s Manual & Parts Book”
as follows:
A. Meyer Mfg. Corp. will repair or replace F.O.B. Dorchester, WI, as Meyer Mfg. Corp. elects, any part of a
new Meyer Industrial Spreader which is defective in material or workmanship:
i. Without charge for either parts or labor during the first (1) year from purchase date to the
original retail customer.
B. In addition to the above basic warranty, Meyer Mfg. Corp. will repair or replace F.O. B. Dorchester, WI
as Meyer Mfg. Corp. elects:
i. Any part of the following which is defective in material or workmanship (not neglect to
recommended use and service) with a “pro-rated” charge for parts only (not labor) during the
stated time period from date of purchase to the original retail customer:
Seven (7) Years: a. The spreader tank body is warranted against rust through (Pro-rated parts only).
Parts included, front and rear end panels, side panels and auger trough.
IV. COMMERCIAL USE: Coverage as in paragraph III.A.1. ONLY, except warranty coverage is for (90) days for
parts and labor to the original commercial retail customer.
V. Repairs eligible for labor warranty must be made by Meyer Mfg. Corp. or an authorized Meyer dealership. The
original retail customer is responsible for any service call and/or transportation of the Industrial Spreader to the
dealership or factory for warranty service.
VI. Except as stated above, Meyer Mfg. Corp. shall not be liable for injuries or damages of any kind or nature, direct,
consequential, or contingent, to persons or property. This warranty does not extend to loss of crop or for any
other reasons.
VII. No person is authorized to give any other warranties or to assume any other obligation on Meyer Mfg. Corp.’s.
behalf unless made or assumed in writing by Meyer Mfg. Corp. This warranty is the sole and exclusive warranty
which is applicable in connection with the manufacture and sale of this product and Meyer Mfg. Corp.’s
responsibility is limited accordingly.
Purchased Product Warranty:
This warranty does not apply to component parts not manufactured by Meyer such as but not limited to wheels, tires,
tubes, PTO shafts, clutches, hydraulic cylinders, scales, etc.