Owner`s manual

Model 8720 / 8865 -41-
FIRST REDUCTION & SPINNER DRIVE
KEY
PART NO.
DESCRIPTION
1
925-3720
Tightener Arm Assembly, Spinner Drive
2
933-3804
Eyebolt, 5/16 x 5" / 4" Thread Length
3
914-3602
1-1/2" 4-Bolt Bearing (Prior to SN SI088720425)
914-3819
1-3/4" 4-Bolt Bearing (SN SI088720426 & Later)
4
929-0003
Extension Spring
5
910-0092
80B15 Sprocket Side Shaft to Spinner Drive (Clamp Style)
6
923-3756
8720 Front Side Shaft 81-3/4" Long
923-3754
8865 Front Side Shaft 121-3/4" Long
7
914-3814
2-Bolt, 1-1/2" Bearing
8
912-0013
2" Nylon Roller Complete
8A
912-0013-1
2" Nylon Roller Only
8B
912-0013-2
Inner Sleeve
9
808-.75-1.25-14
3/4" I.D. x 1-1/4" O.D. x 14Ga. Machine Bushing
10
851-7510-3Z
3/4-10 x 3" Machine Bolt Zinc
11
910-3755
Reduction Sprocket Weldment (Nonshear)
12
925-3777-1
Tightener Extension Arm
13
14-0031
2" Bearing 4-Bolt
14
925-3779-1
3/4-10 x 3" Machine Bolt-Special
15
933-3640
Grease Line, Rear 1st Reduction 21"
16
808-1.5-2.25-10
12-Machine Bushings (10 - For Split Sprocket) (Prior to SN SI088720425)
808-1.75-2.5-10
12-Machine Bushings (10 - For Split Sprocket)(SN SI088720426 & Later)
17
910-0089
80B20 1-1/2" Bore Solid Sprocket (Prior to SN SI088720425)
910-0120
80B20 1-3/4" Bore Solid Sprocket (SN SI088720426 & Later)
18
925-3601
Front Bearing Plate
19
923-3755
PTO Splined Shaft 1-1/2x42-3/4" (Prior to SN SI078720427)
923-3755-TR
PTO Splined Shaft 1-1/2x22-3/4" (Prior to SN SI078720427)
923-3755-S
PTO Splined Shaft 1-1/2x34-3/4" (SN SI078720427-SI088720425)
923-3755-TR-S
PTO Splined Shaft 1-1/2x14-3/4" (SN SI078720427-SI088720425)
923-3757
PTO Splined Shaft 1-3/4x34-3/4" (SN SI088720426 & Later)
923-3757-TR
PTO Splined Shaft 1-3/4x14-3/4" (SN SI088720426 and Later)
SI-87/8865-CSU-
NGC
Center Shaft Update from 1-1/2" to 1-3/4"
20
911-0069
#80-119 Roller Chain
21
911-0054
#80-94 Roller Chain 1000 RPM
911-0068
#80-78 Roller Chain 540 RPM
22
933-3631
Grease Line, Front Center Shaft Bearing
23
933-3646
Grease Line, Center Bearing Center Shaft, Left Side
24
933-3645
Grease Line, Rear Center Shaft Bearing to Right Side
25
925-3779
Tightener Arm Assembly
26
35-0010
Key, 3/8 x 1-1/2"