Owner`s manual

Model 8720 / 8865 -27-
10. REPLACEMENT PARTS
10.1. INTRODUCTION
WARNING: SHUTOFF AND LOCKOUT POWER BEFORE CLEANING, ADJUSTING, LUBRICATING
OR SERVICING THIS SPREADER. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY
OR DEATH.
WARNING: BEFORE SERVICING THIS PRODUCT, ENSURE THAT ALL PERSONNEL, INCLUDING
FAMILY MEMBERS ARE FAMILIAR WITH THE SPREADER AND THE SAFETY HAZARDS THAT ARE
PRESENT, ALONG WITH THE SAFETY PRACTICES THAT SHOULD BE OBSERVED WHILE WORKING
ON THIS EQUIPMENT.
Whenever adjusting, cleaning, lubricating or otherwise servicing this spreader, you must shutoff and lockout
power to the spreader. Because this spreader can be truck mounted or powered by a tractor, methods vary.
On truck mounted units, the connection between the truck and the spreader is permanently installed and not
intended to be disconnected. On trucks, disengage the PTO drive, turn off the engine, set the parking brake,
remove the ignition keys and keep them in your possession to prevent anyone else from accidentally applying
power to the box unexpectedly. For tractors, disconnect the PTO, disconnect and relieve pressure of the
hydraulics, turn off the tractor and set the brakes.
At times, parts on this equipment will become worn or damaged. Performing repairs on this equipment can
pose a risk of injury including death. To reduce risk, the party that will be doing the repair should be very
knowledgeable of the implement and the equipment that they will be using to do the repair.
 Review the repair so that a plan can be put together and the proper equipment can be used to repair
this implement safely and correctly.
 Personal safety equipment may include items such as safety glasses, protective footwear, hearing
protection, gloves, fire retardant clothes, etc.
 The use of hoists and/or supports may be needed to handle heavy components.
WARNING: WORKING UNDER SUSPENDED PARTS PRESENTS A CRUSH HAZARD. DO NOT
WORK UNDER SUSPENDED OR BLOCKED PARTS.
 If the implement is being repaired in the field, make sure the parking brake of the tractor is engaged, the
implement is on solid and level ground.
 Welding and torching should be done by properly trained individuals who have proven their skills.
Throughout this manual, when directed to shutoff and lockout power, be familiar with the previously described
procedures for the type of machine you are operating.
IMPORTANT: Call the factory for any additional details you may need to perform the repair. Some parts may
come with instructions sheets to assist in your repair. Instruction sheets may be provided with your parts order.
Otherwise, if available, they can be e-mailed or faxed for your convenience. Meyer Manufacturing Corporation's
toll free number is 1-800-325-9103.
Be environmentally friendly and dispose of any waste materials properly. Recycle when appropriate.
DANGER: INSPECT THE AXLES, O-BEAMS, SPINDLES, TIRES, HITCHES, SAFETY SHIELDING,
SAFETY SIGNS AND SAFETY LIGHTING REGULARLY. THESE PARTS OF YOUR IMPLEMENT, IF NOT
WATCHED CLOSELY, COULD POSE POTENTIAL INJURY INCLUDING DEATH. IF AN ITEM IS FOUND IN
NEED OF REPAIR, TAG THIS UNIT AS INOPERABLE AND HAVE QUALIFIED PERSONNEL REPAIR
IMMEDIATELY.