HOTSHOT HD COMMERCIAL BROADCAST SPREADER MODEL 38160 OWNER’S MANUAL
ASSEMBLY 5/32 Dia. x 1 1/4” Cotter Pin Free Wheel 3/16 Dia. x 2” Cotter Pin 1/4-20 Hex Nut 1/4-20 x 2 3/4” Hex Bolts Drive Wheel Attach leg/brace to frame inserting the 1/4-20 x 2 3/4” bolts from the inside of the frame as shown. Secure with (4) 1/4-20 hex nuts. NOTE: Bolts are extra long and will be used for attaching the ice melt deflector. 2 Remove spreader and components from carton and place spreader upside down.
OPERATION 1. The spreader can be used with or without the deflector. With the deflector the overall swath width will be approximately 24” to 30”. Without the deflector the spreader will throw most ice melt products 10 feet or more. 2. Always fill the spreader on the driveway or sidewalk-not on the lawn. Make sure screen is in hopper and spreader is in the “OFF” position. 3. Start spreader moving before opening port. Close before stopping. Always push spreader, never pull. 4.
Parts List for Model 38160 9 10 19 8 20 22 16 11 12 15 13 21 17 7 66 7 23 25 24 14 26 4 5 27 18 3 28 2 29 30 38-Inside Hopper 31 1A 1 32 35 34 37 36 33 PART OF OUR SERVICE IS PROVIDING REPLACEMENT PARTS, Parts may be obtained through your local distributor. Be sure to give the: Meyer Products, Inc. # PART # 1 PSB16092 1A # PART # Hopper* 13 PSB16094 PSB16091 Hopper Assembly 14 2 PSB16093 3 216-486-1313 www.meyerproducts.