Instructions / Assembly

26
MEYER®
SNOW PLOWS
LIMITED WARRANTY
18
How To Get Service: In order to obtain service under this warranty, the original purchaser must:
• Use all reasonable means to protect the complete snow plow package from further damage;
• Return the claimed defective part to the Meyer
®
/Diamond
®
Distributor/Sub-Distributor from whom the product
was purchased or to any authorized Meyer
®
/Diamond
®
Distributor/Sub-Distributor, transportation and freight
charges prepaid. Only Meyer
®
/Diamond
®
Distributors/Sub-Distributors are authorized to perform the obligations
under this warranty. For the address and telephone number of the Meyer
®
/Diamond
®
Distributor/Sub-Distributor
nearest you, check the telephone directory, go to www.meyerproducts.com, write us at the address below,
or call [phone] for assistance;
• Provide maintenance record and receipts for required maintenance, if requested;
• Allow inspection of damaged parts and/or complete snow plow package if deemed necessary
by Meyer Products.
• It is the responsibility of the original purchaser to establish the warranty period by verifying
the original delivery date.
A bill of sale/sales receipt, cancelled check or some other appropriate payment record may be kept
for that purpose.
How State Law Applies: This warranty gives you speci c legal rights, and you may also have other rights
which vary from state to state.
How to register your Meyer/Diamond Plow to receive the ROC Solid Warranty
• Go to www.meyerproducts.com and click on the link to register your plow.
• Fill out the information on the form as required.
• The serial number location of the moldboard is shown in Figure 1.
• Fill out the remainder of the information to complete the registration.