Instructions / Assembly

SELF ANGLING OPERATION: The Self Angling feature is designed
to automatically angle the plow left or right depending on the
amount of snow weight detected going forward or backward
when moving. Once the force of the snow is released the plow
automatically returns to the center or straight position. The
operator can easily pre-determine the plow angle direction by
positioning the blade/plow into the snow with the most weight,
this will self-angle the blade accordingly. On the  rst pass of a
fresh snowfall the blade/plow may push the snow forward not
sensing weight to the left or right, this is normal. After the  rst
pass the operator will determine the angle by the size of the “bite”
taken with the plow.
TIP: DRIVEWAY PLOWING RECOMMENDATION: When plowing
a driveway with a garage, we recommend the following method.
Lift the blade/plow as high as possible, then drive through/ over
the snow facing the garage. Lower the blade in front of the
garage, slowly back away (back-dragging) from the garage
pulling the snow thus, clearing a pathway to operate. Raise
the blade, turn around, back into the cleared path, now facing
away from the garage. Drop the blade and pick the left or right
side of the path and plow forward. The self-angling feature will
automatically angle the blade accordingly. Repeat process until
driveway is cleared.
TIP: Always plow with the storm, don’t wait until after the
storm is over. Plow every 2-3” of accumulation. This allows you
to manage the positioning of snow piles over time saving space
and time.
For more tips and plowing recommendations please
visit www.meyerproducts.com for a free plowing tips and
guidelines brochure.
PLOWING WITH SELF ANGLING
10
1
17, 18, 24
3, 4, 6, 8, 9, 14
SAFETY PRECAUTIONS - See pages 2-3 for de nitions
(Fig. 16)
Self Angling Arm
To use self angling,
pin must be in
the raised position.