User guide

80
CHAPTER 4
Software Updating
Figure 4.5. Project files are ready to be burned.
5. On the top-left side of the Writable CD folder, click Write these files to CD. The CD
Writing Wizard will launch.
6. Type in a descriptive name in the CD Name text box if desired, and then click Next.
Windows XP will begin burning the files to your CD-R or CD-RW media.
TIP: Once the files have been burned to CD, you can click on the drive letter
associated with your CD-R/CD-RW drive to display its content and verify that
the recording was successful.
4.4.3. Viewing Data
The Data menu allows you to store and recall a complete set of data — called a DataGroup
— individually by measurement. This means that you can store and recall data specifically
for a Band Spectrum, Line Spectrum, Delay Finder and Frequency Response measurement.