User guide

67
CHAPTER 3
SIM 3 Configurations and Branches
3.1.11. Saving/Storing Branch Measurements
Clicking the Store button in the Live Branch row will open up the Store DataGroup dialog and
allow the current measurement to be named and stored. Any additional notes may be placed
in the Notes field. Once the measurement is stored, it may be recalled into memory locations
A through D.
To aid in storing measurements on the fly, the F5 (QuickStore) function stores the current
measurement data with a default name, and recalls it immediately to the Mem A location.
Each DataGroup can be individually renamed or deleted. Also, each measurement is
complete with all of the traces, plus the particular branch, microphone number, delay
settings, mode, and so on.
3.1.12. Recalling Branch Measurements
Use the memory (Mem) buttons and dropdown lists in the Selector tab, or Data > Recall
DataGroup, to recall stored measurements for reference and comparison into one of the
four memory locations — A through D. Recalled DataGroups can be renamed or deleted if
desired, and additional notes may be added. Pressing the F7 key will also open the Recall
DataGroup dialog.
3.1.13. Comparing Branch Measurements
Up to four stored traces, plus the Live Branch trace, can be compared at the same time
through any of the measurement views.
Memory locations A through D allow up to four stored traces to be viewed in the graph
windows. Each location has a primary dropdown box on the left, where any of the branches
for which measurements have been made and stored can be selected. A secondary
dropdown box on the right allows the user to choose from among any measurements that
have been made using that branch. The checkbox on the right of each memory row allows
the trace to be placed in the graph window and compared with other stored traces and/or
the Live trace.