User guide

64
CHAPTER 3
SIM 3 Configurations and Branches
NOTE: When defining a new Branch, make sure you use valid measurement
points and that a physical connection exists into the sound system with the
correct address (Ad) and channel (Ch) selected.
Figure 3.12. New and Delete buttons in Branches tab
3.1.8. Creating Branches using Multiple Switchers
Each of the line and mic switchers have bus addresses that can be selected in the Branches
menu to create branches. Depending on how the physical connections are made to the
sound system and the desired measurement, a branch could be made from any combination
of valid measurement points as long as each Branch has a Console, a Processor, and a Mic.
These points can be selected from different switchers, including the front panel inputs.
Figure 3.13. Branch using Generator as source, Processor from line switcher 2, and Microphone from mic
switcher 1