User guide

CHAPTER 3

SIM 3 Configurations and Branches

Figure 3.8. Front-Panel channels dropdown menu for Console in Branches tab.

NOTE: See Section 6.10, Generator, in Chapter 6 of this manual for more

details on how to use SIM 3’s built-in noise, sine wave, and pulse generators.

■ Processor Channels: Two (2) line-level inputs, Line 1 and Line 2 — If Generator is

selected as Console the software only allows you to select Line 2 in Processor. This

is because the output of the Generator is fed directly to Line 1 and the level will be

displayed in the Line 1 meter. This allows SIM3 to make a measurement using the

Generator as reference point and Line 2 as measurement point.

Figure 3.9. Front-Panel channels dropdown menu for Processor in Branches tab

NOTE: The default Branch 0 conﬁguration is set as follows: Console —

Generator; Processor — Line 2; Microphone — Mic 1.