User guide

59
CHAPTER 3
SIM 3 Configurations and Branches
3.1.6.1. Address
The Address (Ad) of a branch tells SIM 3 which device is used to find the input signals within
the entire measurement system.
The Address (Ad) dropdown box is located to the immediate left of the each of the three
Channel (Ch) dropdowns. Click on it to select the address of the following sources:
■ Front Panel (FP) – Selecting Front Panel (FP) as address will assign connections directly
from the SIM-3022 analyzer.
NOTE: See the section on the SIM-3022 analyzer in Chapter 2 of this manual
for more information on the physical layout of the front panel.
NOTE: See section 3.1.4.4. “Front Panel Tab” earlier in this guide for more
information on how to set the software parameters for the front panel.
■ Numeric Address (0-9) – Selecting numeric address 0-9 as the address will assign
connections from Line Switchers (Console and Processror) or Mic Switchers
(Microphone).
NOTE: This numeric address (0-9) in the software must match the address
you manually set on the line switcher and/or mic switcher for the particular
console, processor and microphone to be used in the branch that is being created.
NOTE: Please refer to Chapter 2 of this manual for more details on how to set
the addresses for SIM-3088 line switchers and SIM-3081 mic switchers.
NOTE: See section 3.1.4, Selecting and Naming Switchers, earlier in this guide
for more information on how to set the software parameters for the SIM 3 line
and mic switchers in your system.