User guide
31
CHAPTER 2
The SIM 3 Hardware
The mute/ON LEDs for channels 9-16 will be lit either green or red, since channels 9-16 are
always used as processor and are either passing signal (green) or muted (red).
2.2.3.3. 0+16 Configuration
This configuration uses all 16 channels as processor outputs (To Speaker) — useful if you are
using another switcher for system line inputs or Line Inputs 1 and 2 on the front panel of the
SIM-3022 analyzer.
In order to make transfer function measurements using one of these points, it needs to
be defined via software by constructing branches in the Branches dialog — selecting the
addresses and the desired channels.
As shown in Figure 2.4, this configuration will light the processor LED for channels 1-8. The
mute/ON LEDs (1-8) will be lit either green (passing signal) or red (muted).
Bus Select
Mute
9
10
11
12
13
14
15
16
5
6
7
8
1
2
3
4
Bus Select
Mute
CONS OLE / PROCESS OR
Bus Select
Mute
CONS OLE / PROCESS OR
Figure 2.8. SIM-3088 Front Panel LED indicators for a 0+16 configuration
The mute/ON LEDs for channels 9-16 will be lit either green or red, since channels 9-16 are
always used as processor and are either passing signal (green) or muted (red).
NOTE: For connection diagrams, see Chapter 3, “SIM 3 Configurations and
Branches” in this manual.