User guide

ii
© 2005 Meyer Sound Laboratories
SIM
®
3 Audio Analyzer System User Guide (software v1.6.42)
The contents of this manual are furnished for informational purposes only, are subject to change without notice, and should not be
construed as a commitment by Meyer Sound Laboratories Inc. Meyer Sound assumes no responsibility or liability for any errors or
inaccuracies that may appear in this manual. Except as permitted by applicable copyright law, no part of this publication may be re-
produced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording or otherwise,
without prior written permission from Meyer Sound.
Meyer Sound, Meyer Sound MAPP Online and SIM are registered trademarks of Meyer Sound Laboratories Inc. (Reg. U.S. Pat. &
Tm. Off.). All third-party trademarks mentioned herein are the property of their respective trademark holders.
Printed in the U.S.A.
Part Number: 05.136.060.12 A
DECLARATION OF CONFORMITY (According to ISO/IEC Guide 22 and EN 45014)
Manufacturer's
Name
Meyer Sound Laboratories Inc.
Manufacturer's
Address
2832 San Pablo Avenue
Berkeley, CA 94702-2204, USA
Declares that the product
Product Name
SIM-3022, SIM-3088, SIM-3081
Product Options
All
Conforms to the following specifications
Safety
BS EN 61010-1:2001
IEC 61010-1 (2001-02) 2nd ed
UL 61010A-1:2002
EMC
IEC 61326 (2002-02)
BS EN 61326:1998
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
SUPPLEMENTARY INFORMATION
The product herewith complies with the requirements
of the Low Voltage Directive 73/23/EEC and the EMC
Directive 89/336/EEC.
Office of Quality Manager
Berkeley, California USA
December 1, 2005
European
Contact
Your local Meyer Sound dealer
or Meyer Sound Germany, GmbH.
Carl Zeiss Strasse 13, 56751
Polch, Germany
Telephone: [phone]
Fax: [phone]
ENVIRONMENTAL SPECIFICATIONS FOR MEYER
SOUND ELECTRONICS PRODUCTS
Operating
Temperature
0˚ C to +35˚ C
Non-operating
Temperature
-40˚ C to +75˚ C
Humidity
to 95% at 35˚ C
Operating Altitude
to 4600 m (15,000 ft)
Non-operating
Altitude
to 6300 m (25,000 ft)
Shock
30 g 11 msec half-sine on each of
6 sides
Vibration
10 Hz to 55 Hz (0.010 m peak-to-
peak excursion)
European Office:
Meyer Sound Lab. GmbH
Carl Zeiss Strasse 13
56751 Polch, Germany
Made by Meyer Sound Laboratories
Berkeley, California USA
o
f
N
o
r
t
h
A
m
e
r
i
c
a
,
I
n
c
.
C
US
T
U
V
R
h
e
i
n
l
a
n
d