User guide

143
CHAPTER 7
Using SIM 3
Figure 7.20. Renaming DataGroups in the Recall DataGroup dialog
7.4.8. Sorting Measurements
During a SIM 3 session a number of DataGroups are likely to be stored, and even with a good
naming convention it might be difficult to find a particular one with simple scrolling. To help
find the measurements, the headings at the top of Recall DataGroup act as Sort buttons for
their respective columns.
Clicking on a particular column heading will perform an alphabetical sort to the contents
of that column; clicking it a second time will reverse the order. To return the DataGroups to
their as-measured order, click on the Saved heading, which records the date and time the
measurement was performed in the international standard YYYY/MM/DD HH:MM:SS (year,
month, day, hour in the 24-hour format, minute, and second) format.
TIP: The headings at the top of the Recall DataGroup dialog function as Sort
buttons for their respective columns.
Figure 7.21. Use headings in Recall DataGroup to sort and locate stored measurements