Specifications
MG-MICA MULTIPURPOSE GRID AND ACCESSORIES
PN: 05.147.034.01 A
Page 38 of 44
Meyer Sound Laboratories Inc.
www.meyersound.com
T: +1 510 486.1166
F: +1 510 486.8356
The MCF-MICA’s rugged steel frame facilitates the use of forklifts. Whether deploying or striking an array, the MCF-
MICA can temporarily support the weight – making it easy to assemble or disassemble the array in stacks of up to four
MICAs.
The MG-MICA should only be moved sideways when being transported on the MCF-MICA caster frame.
The MICA GuideALinks allow multiple transport angles with the MCF-MICA caster frame.
■ Use the 5 position (below left) on the MICA rear GuideALink to get the first MICA at 0 degrees with respect to the
caster frame. This setting is preferred when all MICAs are at 0 degrees.
■ Use the 0 position (below right) to downtilt the first MICA with respect to the caster frame, to compensate if the
rest of the MICAs in the stack have severe angles.
CAUTION: Avoid
moving the MCF-
MICA in the front-to-back
direction of the loudspeakers
(the long side); always move
the stack sideways to avoid
tipping it over.
5 position
for 0°
0 position